Isuzu KB P190. Manual — part 615
ENGINE EXHAUST 6F-11
(2.4L model)
Installation
1. Place new gaskets on the converter front and rear pipes,
and connect the converter to the exhaust pipes.
2. Tighten the bolts with the specified torque.
3. Reinstall the bracket bolts and tighten them.
6F-12 ENGINE EXHAUST
Exhaust Silencer
Exhaust Silencer and Associated Parts
RTW46FMF000701
Legend
1. Exhaust Silencer
2. Exhaust Silencer Fixing Nuts
3. Rubber
Removal
(2.4L)
1. Disconnect battery ground cable.
2. Raise the vehicle and support with suitable safety stands.
3. Remove the damper rubber and nut (2)(3).
4. Remove exhaust silencer (1).
ENGINE EXHAUST 6F-13
Installation
(2.4L)
1. Install the exhaust silencer and tighten two nuts and the
damper rubbers.
Torque:
Bolts: 43 N
⋅⋅⋅⋅m (4.4 kgf⋅⋅⋅⋅m)
6F-14 ENGINE EXHAUST
Main Data and Specifications
Exhaust system
Pipe outside diameter
✕ thickness
Front pipe
mm(in)
44.5
✕ 1.5 (1.75✕0.059)
Middle pipe
mm(in)
50.8
✕ 1.5 (2.00 ✕ 0.059)
Rear pipe
mm(in)
50.8
✕ 1.5 (2.0 ✕ 0.059)
Silencer
Type
Circular section-shell construction
of triple; double skin and end plates, internal
construction of baffles
and perforated tubes.
Number of suspension points
Type
Catalytic converter type (If applicable)
4
Rubber
Three way Catalytic Converter
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст