Isuzu KB P190. Manual — part 693
Engine Mechanical – V6
Page 6A1–293
Power Steering High Pressure Line Attaching Bolt . . . . . . 8.0 – 12.0 Nm
Power Steering High Pressure Line Flare Nut. . . . . . ... 25.0 – 35.0 Nm
Steering Gear Housing Mounting Nut:
Stage 1 . . . . . . . . . . . . . . . . . . . . . . . . . 60.0 Nm
Stage 2 . . . . . . . . . . . . . . . . . . . . . . . . 40° – 50°
Oil Suction Pipe Attaching Bolt. . . . . . . . . . . . . . . . 10.0 Nm
Crankshaft Oil Deflector Attaching bolt. . . . . . . . . . . . . 10.0 Nm
Oil Level Sensor . . . . . . . . . . . . . . . . . . . . ... 20.0 Nm
Oil Pan to Cylinder Block Attaching Bolt. . . . . . . . . 20.0 – 26.0 Nm
Oil Pan to Crankshaft Rear Oil Seal Housing Attaching Bolt . . 8.0 - 12.0 Nm
Flexplate Attaching Bolt:
Stage 1 . . . . . . . . . . . . . . . . . . . . . .. 26.0 – 34.0 Nm
Stage 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
°
Crankshaft Rear Oil Seal Housing Attaching Bolt. . . . . . 8.0 – 12.0 Nm
Connecting Rod Cap Attaching Bolt:
Stage 1 . . . . . . . . . . . . . . . . . . . . . . . . . 30.0 Nm
Stage 2 . . . . . . . . . . . . . . . . . . . . Loosen Completely
Stage 3 . . . . . . . . . . . . . . . . . . . . . . . . . 25.0 Nm
Stage 4 . . . . . . . . . . . . . . . . . . . . . . . . . ... 110
°
Crankshaft Bearing Cap Remover Nut . . . . . . . . . . . . . 11.0 Nm
Crankshaft Main Bearing Cap Inboard Attaching Bolt:
Stage 1 . . . . . . . . . . . . . . . . . . . . . . . . . 20.0 Nm
Stage 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
°
Crankshaft Main Bearing Cap Outboard Attaching Bolt:
Stage 1 . . . . . . . . . . . . . . . . . . . . . . . . . 15.0 Nm
Stage 2 . . . . . . . . . . . . . . . . . . . . . . . . . ... 110
°
Crankshaft main Bearing Cap Side Attaching Bolt:
Stage 1 . . . . . . . . . . . . . . . . . . . . . . . . . 30.0 Nm
Stage 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
°
Cylinder Block Threaded Plug . . . . . . . . . . . . . 27.0 - 35.0 Nm
Oil Jet Attaching Bolt . . . . . . . . . . . . . . . . ... 8.0 – 12.0 Nm
Engine Mechanical – V6
Page 6A1–294
7 Special
Tools
Tool Number
Illustration
Description
E-308
Seal Remover
Previously released.
EN-46101
Spark Plug Tube Seal Guide Set
Used to protect the spark plug lip seals when installing the
camshaft cover to the cylinder head.
EN-46103
Camshaft Actuator Valve Seal Installer
Used to install the camshaft actuator valve seals into the front
cover.
EN-46105 –
1 and 2
Camshaft Locking Tool Set
Used to retain camshaft position during timing chain or
camshaft actuator replacement.
EN-46106
Flexplate Holding Tool
Used to retain crankshaft position during valve-train overhaul
and harmonic balancer removal.
EN-46108
Timing Chain Retention Tool Set
Used to retain timing chain tension during camshaft and
sprocket removal.
Engine Mechanical – V6
Page 6A1–295
Tool Number
Illustration
Description
EN-46109
Engine Front Cover / Oil Pan / Crankshaft Rear Oil Seal
Housing Installation Guide Pins
Used to align the engine front cover/oil pan/crankshaft rear oil
seal housing during engine assembly.
EN-46110
On-vehicle Valve Spring Compressor
Used to remove valve springs with the cylinder heads
assembled to the cylinder block.
EN-46111
Crankshaft Rotation Socket
Used to rotate the crankshaft during engine overhaul.
EN-46112
Timing Chain Tensioner Retraction Springs
Used to retain the timing chain tensioner plunger within the
tensioner bore during assembly of timing chains to engine.
EN-46114
Engine Lift Brackets
Used in conjunction with commercially available lifting
equipment to lift engine.
EN-46116
Valve Stem Seal Remover / Installer
Used to remove/install the valve stem seals.
Engine Mechanical – V6
Page 6A1–296
Tool Number
Illustration
Description
EN-46117
Valve Stem Key Remover / Installer
Used in conjunction with J-8062 or EN-46110 to remove and
reinstall the valve stem keys.
EN-46119
Off-vehicle Valve Spring Compressor Adaptor
Used in conjunction with J-8062 to remove valve springs with
the engine disassembled.
EN-46120 and
J-42096
Valve Guide Reamer
Used to oversize valve guides prior to the installation of new
oversized valves.
EN-46121
Connecting Rod Guide Pin Set
Used to guide connecting rods onto the crankshaft journals
and prevent damage to the cylinder bores, journal faces and
piston cooling jets during engine assembly procedures.
EN-46122
Oil Control Valve Check Ball Remover / Installer
EN-7115
Torque Angle Wrench
Used to accurately tighten fasteners when an angle torque is
required.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст