Isuzu KB P190. Manual — part 51

SHEET METAL 2B-7

• Clearance : 4.0 mm (0.16 in)
• Height (step) : Flushness
• Adjust clearance using the hinges on the engine hood.

RTW72BSH000701

• Adjust height (step) using the hood rests (1).

Engine Hood Striker
• Apply a light coat of grease to the striker.

4. Hood Hinge Bolt
• Tighten the engine hood hinge fixing bolts to the specified

torque.

Torque N

⋅m(kgf⋅m/lb⋅in)

10 (1.0 / 87)

2B-8 SHEET METAL

ENGINE HOOD ASSEMBLY (B TYPE)

REMOVAL AND INSTALLATION

RTW72BLF000901

Removal Steps

Installation Steps

1. Washer nozzle tube

2. Hood hinge bolts

3. Engine hood

4. Washer nozzle

5. Hood insulator

6. Hood seal

6. Hood seal

5. Hood insulator

4. Washer nozzle

3. Engine hood

2. Hood hinge bolts

1. Washer nozzle tube

SHEET METAL 2B-9

RUW52BSH002501

Important Operations - Removal

1. Washer Nozzle Tube

4) Open the hood.

5) Support the hood.

6) Remove the windshield washer nozzle tube.

RUW52BSH002601

2. Hood Hinge Bolts
• Before removing the hinges from the engine hood, scribe a

mark showing location of the hinges to facilitate installation in
the original position.

RTW72BSH001101

Important Operations - Installation

3. Engine Hood
• Check the engine hood and fender. (1)

• Clearance : 4.0 mm (0.16 in)
• Height (step) : Flushness
• Adjust clearance using the hinges on the engine hood.

RTW52BSH000301

• Adjust height (step) using the hood rests (1).

Engine Hood Striker
• Apply a light coat of grease to the striker.

2B-10 SHEET METAL

2. Hood Hinge Bolts
• Tighten the engine hood hinge fixing bolts to the specified

torque.

Torque N

⋅m(kgf⋅m/lb⋅in)

10 (1.0 / 87)