Isuzu KB P190. Manual — part 97
3D-4 REAR SUSPENSION
N
⋅m(kgf⋅m/lb⋅ft)
RTW73DLF000301
REAR SUSPENSION 3D-5
REAR SUSPENSION
GENERAL DESCRIPTION
Rear suspension absorbs vibration from the road surface thus preventing vehicle damage, as well as providing a
comfortable ride.
Components parts
• Spring between the body and the axle case
• Spring shackle connecting the spring to the body
• Clamp and U-bolt fixing the axle case to the spring
• Shock absorber as a countermeasure for vibration
3D-6 REAR SUSPENSION
LEAF SPRING AND SHOCK ABSORBER
LEAF SPRING AND ASSOCIATED PARTS
460R300001
Legend
1. Parking Brake Cable Bracket
2. Nut and Washer
3. Nut and Washer
4. Shock Absorber
5.
Nut
6. U Bolt and Seat
7. Lower Clamp
8.
Nut
9. Shackle Plate
10. Shackle Pin
11. Rubber Bushing
12. Nut and Plain Washer
13. Spring Pin
14. Leaf Spring
15. Bump Rubber
REAR SUSPENSION 3D-7
F03L100003
Removal
• Jack up the rear axle and place chassis stands under the
frame near the front end of the rear spring brackets.
Note:
• Be careful not to stretch the flexible brake hose or
parking brake cable.
• Support the vehicle on the specified jack point.
1. Remove the parking brake cable from the leaf spring.
2. Loosen the shock absorber fixing nut and remove the nut
and special washer from the lower clamp.
3. Remove the shock absorber fixing nut and washer at frame
side.
4. Lifting the rear axle using a jack, remove the shock
absorber and lower the jack.
5. Remove the U bolt fixing nut.
6. Take out the U bolt, seat and lower clamp.
7. Support the leaf spring using a jack and remove the
shackle pin fixing nuts.
8. Drive out the shackle pin, using a brass bar and hammer.
9. Remove the shackle plate and rubber bushings.
10. Remove the nut and drive out the shackle using a brass bar
and hammer.
11. Remove the leaf spring.
12. Remove the bump rubber.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст