Isuzu KB P190. Manual — part 1145

7B-16 MSG MODEL

Important Operations

6. Front Cover with Oil Seal
Remove the front cover with oil seal from the transmission
case.

7. Counter Gear Snap Ring

8. Bearing Snap Ring
Use a pair of snap ring pliers to remove the snap ring.

MSG MODEL 7B-17

MAJOR COMPONENT

INTERNAL PARTS

Disassembly steps

1. Detent assembly

2. Shift arm assembly & interlock pin

3. Rev. and 5th gear assembly

4. Counter gear shaft assembly

5. Top & main gear shaft assembly

7B-18 MSG MODEL

MINOR COMPONENTS

DETENT, SHIFT ARM ASSEMBLY AND INTERLOCK PIN

Disassembly Steps

1. Detent spring plate and gasket

2. Detent spring

▲ 3. Detent ball

4. Rev. - 5th shift rod

5. Rev. - 5th shift arm

6. 1st - 2nd shift rod

▲ 7. 3rd - 4th shift rod

▲ 8. 3rd - 4th shift arm

▲ 9. 1st - 2nd shift arm
10. Interlock pin
11. Intermediate plate and gear assembly

MSG MODEL 7B-19

Important Operations

3. Detent Ball

7. 3rd - 4th Shift Rod

8. 3rd - 4th Shift Arm

9. 1st - 2nd Shift Arm

1) Hold a round bar against the shift arm end.

This will prevent damage to other components.

2) Use a spring pin remover to remove the shift arm spring pin

from the shift arm and the shift rod.

Spring Pin Remover : 9-8529-2201-0

Discard the used spring pin.

3) Move the 3rd - 4th shift rod forward.

Take care not to lose the interlock pins.