Isuzu KB P190. Manual — part 1279
8A-178 ELECTRICAL-BODY AND CHASSIS
INSPECTION AND REPAIR
Switch side
Harness side
B60
B60
LIGHTING SWITCH
Lighting Switch Connections
Terminal
SW No.
position
3 2 1
OFF
Tail
Headlight
Switch side
Harness side
B60
B60
HEADLIGHT BEAM SWITCH
Headlight Beam and Passing Switch
Connections
Terminal NO.
SW position
1 4
HI
At “Dimmer” position
LO
At “Passing” Position
ELECTRICAL-BODY AND CHASSIS 8A-179
RTW78ASH002901
LIGHTING RELAY, TAIL RELAY
Check continuity between the relay terminals.
2
-
1
. . . . . . . No continuity
(When battery voltage is applied between
3
and
4
)
2
-
1
. . . . . . . Continuity
GLOVE BOX ILLUMINATION
Removal
1. Remove the bulb cover
1
.
2. Remove the bulb
2
.
Installation
To install, follow the removal steps in the reverse order.
POWER/3rd START SW
Removal
• Refer to the “Front consol” Section 10 of this manual.
1. Disconnect the battery ground cable.
2. Remove the power/3rd start switch.
3. Remove the bulb.
Installation
To install, follow the removal steps in the reverse order.
A/T LEVER LIGHT BULB
Removal
• Refer to the “Front consol” Section 10 of this manual.
1. Remove the A/T lever cover.
2. Remove the light bulb
1
.
Installation
To install, follow the removal steps in the reverse order.
8A-180 ELECTRICAL-BODY AND CHASSIS
FRONT FOG LIGHT
PARTS LOCATION (RHD)
RTW78AXF036901 & RTW78AXF043101
ELECTRICAL-BODY AND CHASSIS 8A-181
PARTS LOCATION (LHD)
RTW78AXF037001 & RTW78AXF043201
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст