Isuzu KB P190. Manual — part 1407
ACCESSORIES 9-23
No.
Connector face
No.
Connector face
D-22
White
Tweeter -LH
P-1
Silver
Battery (+)
H-14
White
Rear body
∼ Rear door -LH
P-2
Silver
Relay
& Fuse box
H-16
White
Rear body
∼ Rear door -RH
P-5
Silver
Battery (-)
H-18
White
Engine room
∼ INST
P-6
Silver
Body earth
H-36
White
INST ~ Front door-RH
P-10
Silver
Engine ground
H-37
White
INST ~ Front door-LH
R-7
Black
Rear speaker -LH
H-39
White
INST ~ Front door-LH
R-8
Black
Rear speaker -RH
H-42
White
INST ~ Front door-driver
H-43
INST ~ Body
H-43
White
INST ~ Body
9-24 ACCESSORIES
AUDIO
REMOVAL AND INSTALLATION
1
2
4
3
5
6
RTW790LF000101
Removal
1. Remove the ash try (6).
2. Remove the center cluster cover assembly (4).
3. Disconnect the connector for the clock, the 4
×4 switch, the
hazard switch.
4. Remove the 4 screws on the Audio.
5. Disconnect the connector for Audio (2).
6. Disconnect the Antenna feeder plug (1).
7. Pull out the audio (2 DIN: 5, 1 DIN: 3).
Installation
To install, follow the removal steps in the reverse order.
ACCESSORIES 9-25
FRONT SPEAKER
REMOVAL AND INSTALLATION
Removal
1. Remove the Front Door Trim Panel.
• Refer to section 10 Cab for door trim panel removal
steps.
2. Remove the Front Speaker (1).
• Remove the screw.
• Disconnect the connector (2).
Installation
To install, follow the removal steps in the reverse order.
9-26 ACCESSORIES
TWEETER
REMOVAL AND INSTALLATION
RTW390SH000101
Removal
1. Remove the Door Trim Panel (1).
• Refer to section 10 “FRONT DOOR ASSEMBLY” for
door trim panel removal steps.
2. Remove the Tweeter (2).
• Remove the three screws.
• Disconnect the connector.
Installation
To install, follow the removal steps in the reverse order.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст