Isuzu N-Series. Manual — part 546
6F-14 Exhaust System
2. Mount the exhaust pipe.
3. Mount the nuts.
Tighten:
Nut to 67 N
⋅m (6.8 kg⋅m/49 lb⋅ft)
4. Mount the vacuum hose and the clips.
Torque Specifications
N6A6445E
N6A6446E
International Service & Parts
Tokyo, Japan
WORKSHOP MANUAL
N-SERIES
ENGINE 4J SERIES
SECTION 6
SERVICE INFORMATION 00-1
ENGINE 4J SERIES
SECTION 00
SERVICE INFORMATION
Contents
TROUBLE SHOOTING . . . . . . . . . . . 00-2
MAIN DATA AND SPECIFICATIONS . . . . . 00-24
SERVICE STANDARD. . . . . . . . . . 00-28
Engine Mechanical . . . . . . . . . . .. 00-28
SERVICING . . . . . . . . . . . . . . 00-32
00-2 SERVICE INFORMATION
TROUBLE SHOOTING
Hard Starting
1. Starter Inoperative
2. Starter Motor Operates But Engine Does Not Turn Over
Checkpoint
Possible cause
Correction
Battery
Loose battery cable terminal poor connec-
tions due to rusting
Clean and/or retighten the battery cable
terminal
Battery discharged or weak
Recharge or replace the battery
Fan belt loose or broken
Adjust or replace the fan belt
Fusible link
Fusible link shorted
Replace the fusible link
Starter switch
Defective starter switch or starter relay
Replace the starter switch or the starter
relay
Starter motor
Defective magnetic switch or starter relay
Repair or replace the magnetic switch
Defective starter motor
Repair or replace the starter motor
Checkpoint
Possible cause
Correction
Battery
Loose battery cable terminal
Clean and/or retighten the battery cable
terminal
Poor connections due to rusting
Recharge or replace the battery
Battery discharged or weak
Recharge or replace the battery
Fan belt loose or broken
Adjust or replace the fan belt
Starter
Defective pinion gear
Replace the pinion gear
Defective magnetic switch
Repair or replace the magnetic switch
Brush wear, Weak brush spring
Replace the brush and/or the brush spring
Engine
Piston, crank bearing seizure, or other
damage
Repair or replace the related parts
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст