Isuzu N-Series. Manual — part 192
FRONT AXLE 4C-63
Tighten:
U-bolt nut to 126 N
⋅m (12.9 kg⋅m / 93 lb⋅ft)
3. Front Propeller Shaft
Tighten:
Front propeller shaft bolt to 103 N
⋅m (10.5 kg⋅m / 76 lb⋅ft)
4. Stabilizer Assembly
1) Refer to STABILIZER.
5. Brake Flexible Hose
Set first the wheels in the straight going position,
then attach the flexible hose to the bracket without
torsion using a clip (1).
Connect the pipe, then tighten the nut (2) to the
specified torque.
Tighten:
Brake flexible nut to 16 N
⋅m (1.6 kg⋅m / 12 lb⋅ft)
Perform bleeding operation after installation of the
brake flexible hoses.
Refer to “Service information” for brake fluid air
bleeding procedure.
6. Tie Rod Assembly
Refer to STEERING LINKAGE (4
× 4 Model).
7. Drag Link
Refer to STEERING LINKAGE (4
× 4 Model).
8. Shock Absorber
Tighten:
Shock absorber under side nut to 95 N
⋅m (9.7 kg⋅m / 70
lb
⋅ft)
9. Wheel and Tire
Tighten:
Wheel nut to 441 N
⋅m (45 kg⋅m / 325 lb⋅ft)
N4A0405E
N4A0406E
N4A0407E
N4A0409E
4C-64 FRONT AXLE
6 studs
N4A0410E
FRONT AXLE 4C-65
UNIT REPAIR
Front Differential
Major Components
Legend
1. Bearing cap
9. Distance piece
2. Side bearing outer race
10. Drive pinion
3. Differential cage assembly
11. Inner bearing inner race
4. Side bearing inner race
12. Inner bearing outer race
5. Backlash and preload adjusting shim
13. Pinion depth adjusting shim
6. Flange nut
14. Oil seal
7. Flange
15. Outer bearing inner race
8. Bearing preload adjusting shim
16. Outer bearing outer race
N4A0411E
4C-66 FRONT AXLE
Disassembly
1. Bearing Cap
Set the differential assembly onto a special fixture.
Apply a setting mark (1) to the side bearing cap
and differential carrier.
Fixture: 5-8840-2029-0
Base: 5-8840-0003-0
2. Side Bearing Outer Race
After removal, keep right and left side bearing as-
semblies separate to maintain inner and outer race
combinations.
3. Differential Cage Assembly
4. Side Bearing Inner Race
Remover: 9-8521-0061-0
Adapter: 5-8840-2031-0
5. Backlash and Preload Adjusting Shim
6. Flange Nut
Holding wrench: 9-8511-1507-0
7. Flange
8. Bearing Preload Adjust Shim
9. Distance Piece
10. Drive Pinion
11. Inner Bearing Inner Race
Remover: 5-8840-0015-0
12. Inner Bearing Outer Race
13. Pinion Depth Adjusting Shim
14. Oil Seal
15. Outer Bearing Inner Race
16. Outer Bearing Outer Race
Drive out the inner bearing outer race or the outer
bearing outer race together with the outer bearing
inner race and oil seal by using a proper bar
through two notches.
N4A0136E
N4A0137E
N4A0138E
N4A0139E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст