Isuzu N-Series. Manual — part 66
1B-34 AIR CONDITIONING
A/C Switch
Legend
1. Center cluster
3. Control panel bezel
2. Knob
4. A/C switch
N1A0092E
AIR CONDITIONING 1B-35
Removal
Preparation:
Disconnect the battery ground cable.
1. Center Cluster
• While pulling the cluster with care, remove the up-
per and backside clips (1) of the cluster.
• Disconnect the cigar lighter and illumination con-
nectors.
2. Knob
3. Control Panel Bezel
Push the four catches at both sides of the bezel to
the inside, and remove the illumination bulb (1)
from the bezel (2).
4. A/C Switch
Push the catches at both sides of the A/C switch to
the inside, and remove the switch by pulling it out.
Installation
To install, follow the removal steps in the reverse order.
N1A0038E
N1A0039E
Legend
1. A/C switch
2. Control lever
3. Catch
N1A0040E
1B-36 AIR CONDITIONING
Refrigerant Line (Except 4HK1-TC Engine Model For Australia)
Legend
1. Refrigerant line (Compressor — Condenser)
4. Front grille
2. Refrigerant line (Receiver / Drier — Evaporator)
5. Refrigerant line (Compressor — Evaporator)
3. Clamp / Clip
1
3
5
3
4
2
N1A0096E
AIR CONDITIONING 1B-37
Refrigerant Line (4HK1-TC Engine Model For Australia)
Legend
1. Refrigerant line (Compressor — Condenser)
4. Front grille
2. Refrigerant line (Receiver / Drier — Evaporator)
5. Band clip
3. Refrigerant line (Compressor — Evaporator)
6. Band clip
2
5
1
3
6
4
N1A0195E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст