Isuzu N-Series. Manual — part 1278
CD and Radio
43
CD
44
OWNER爷S MANUAL
JAC High end Light Trucks
Panel function descriptions
1.
噎噎Preset key 1
2.
噎噎Preset key 2
3.
噎噎Preset key 3
4.
噎噎Preset key 4
5.
噎噎Preset key 5
6.
噎噎Preset key 6
1
2
4
3
5
6
7. SOUND 噎噎sound effect mode, sound effect key
8.
Short press: power on; Long press: power off.
9. 噎噎Monitor
10. 噎噎Volume knob. Press up/down to adjust the sound volume; regulate the frequency mode selected.
11. 噎噎OURCE. . .Short press: select the sound source (CD).
BAND. ..Short press: select the wave band
AST. .. Long press: auto storage(CD) . ...Short press: auto storage(cassette)
12.
噎噎Attuning mode(short press: auto search upward / downward; long press: manual search upward/downward
13. 噎噎fast forward
14. 噎噎fast backward
15. 银噎噎Eject key(CD)
16. 噎噎Disc chamber/cassette ch-amber
45
Acoustic apparatus
on/off
Press
for start, and press
over 2 seconds and the master unit is turned off.
Sound volume
Press - or + to adjust the volume.
Mute
Short press
key to enable/disable mute mode.
Sound effect mode
Select the desired type of sound effect as per your personal preference. Press SOUND key to select BASS-TRE, and
press the sound volume key +/- to adjust the type of sound effect.
RND*噎噎CD random play on/off
RPT*噎噎CD repeat on/off
SCN*噎CD music scanning
原BA S -TRE院 auto setting the
BASS or TREoftheapparatus.
原FLAT院Original
原JASS院Jazz music
原VOCAL院Speech
原POP院pop music
原CLSSSIC院classical music
原ROCK院rock & roll music
46
OWNER爷S MANUAL
JAC High end Light Trucks
Acoustic mode setting
Press SOUND key to select the item you want to adjust.
Again press +/- key to adjust the item selected.
Five seconds later the screen turns back to the previous mode.
Only with BASS-TRE selected as the sound effect mode, can BASS and TRE
settings be adjusted.
Sound source selection
Press SOURCE key to select the desired sound source.
When a cassette is inserted in, the sound source will be automatically changed from radio to cassette play. Please take
out cassette when you want to listen to radio, so as to protect the unit.
Radio
Wave band
Press the BAND key to select the wave band desired.
原Sound effect type院渊BAS-TRE袁FLAT袁
JASS袁VOCAL袁POP袁CLSSSIC袁ROCK冤
原BASS院deep sounding
原TREBLE院high pitch
原BLANCE院balance on left and right
原BLANCE院balance on left and right
原BLANCE院balance on left and right
原Radio
原CD/Cassette*
47
48
Auto search
Press Button
or
to auto search the radio stations.
Press
or
key tune to the radio stations of low frequency, or press key
to tune to the radio stations of high fre鄄
quency.
You may press the same key if you want to search for another radio station.
Manual search (if you know the frequency of the radio station you need)
Long press Key or
for about 2 seconds before entry of manual search. Press Key for search of low-frequency ra鄄
dio stations.
Press for search of high frequency radio stations (If there is no search in 5 seconds, the system will return to the previ鄄
ous operation state).
Preselected radio stations (stored or preselected)
Manual storage of radio stations in preset keys
Use the preset keys (1-6) to store 6 radio stations in each wave band. Tune to the radio station desired, and press the
preset key needed (1-6) for 2 seconds at least, and the radio station available now can be stored into this preset key.
Call back the presetting
Press the preset key needed (1-6), the preset radio station will be called out.
Auto storage of radio stations
This function can auto store 6 FM radio stations(with most powerful signals) in the FMAST wave band or 6 MW(AM) radio
stations
OWNER爷S MANUAL
JAC High end Light Trucks
(With most powerful signals) in the MW (AM) wave band. When this auto storage function is used for new radio stations,
new radio stations will take the place of those stored previously in FMST or MW (AM)AST waveband.
Press AST key to activate the auto storage function.
The main unit gives out "beep" before muteness.
"Beep" can be heard after the storage is over.
Sometimes less than 6 radio stations can be found.
CD play *(CD)
Put the disc (printed side up)into the disc chamber and the play begins.
If a disc is already in the chamber, press the SOURCE key to select CD as the source. Play begins.
Previous/next music
Press Key 3 or 4 to select the music desired. Play begins with the music selected.
Music fast forward/backward
Press Key 3 for more than 2 seconds to drive the disc fast forward or fast backward. Release the key and the normal play
will go on.
Random play
Press RND key for at least 2 seconds to activate/quit Random play.
Repeated play
Repeat the play of the present music. Press RPT key for at least 2 seconds to activate/quit the Repeated play.
Music scan
This function can scan each of the music pieces for several seconds. Press the SCN key to activate/quit the Music scan
49
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст