Isuzu N-Series. Manual — part 971
7B-120 Automatic Transmission (Smoother)
Special Tools
Illustration
Tool No.
Tool Name
5-8840-2587-0
Bearing Remover
5-8840-2244-0
Bearing Installer
5884025870
5884022440
Automatic Transmission (Smoother) 7B-121
Control Box
Components
Legend
1. Cover
17. 2-4-6-r Shift Solenoid and O-ring
2. Lever Bushing
18. 1-3-5 Shift Solenoid and O-ring
3. Relay Lever
19. Gear Select Position Sensor and O-ring
4. Relay Lever Shaft
20. Internal Lever
5. Breather Pipe, Breather Hose, and Clip
21. Select Lever
6. Spring
22. Spring Pin and Stopper Ring
7. Spring Seat
23. Shift Lever Shaft Oil Seal B
8. Spring
24. Gear Shift Position Sensor and O-ring
9. Spring Seat
25. Spring Pin and Select Internal Lever
10. Spring
26. Neutral Switch
11. Shift Lever Shaft Oil Seal A
27. Gearshift Control Box
12. Spring Pin; Shift Lever Shaft
28. Spring Pin and Joint; Select Solenoid
13. Shift Lever Shaft
29. Select Solenoid and O-ring
14. Spring Pin and Joint; 1-3-5 Shift Solenoid
30. Select External Lever Oil Seal
15. Spring Pin and Joint; 2-4-6-R Shift Solenoid
31. Select External Lever
16. Plate
N7A1264E
7B-122 Automatic Transmission (Smoother)
Disassembly
1. Remove the neutral switch (1), the breather pipe,
breather hose and clip (2), the gear select position
sensor and O-ring (3), and the gear shift position
sensor (4).
2. Remove the plate (10).
a. Remove the select solenoid, 2-4-6-R shift
solenoid, and 1-3-5 shift solenoid connectors
from the plate.
b. Remove the plate from the gearshift control
box.
3. Remove 2-4-6-R shift solenoid (11) and 1-3-5
shift solenoid (12).
4. Remove the cover (9).
5. Remove the select solenoid (5).
6. Remove 2-4-6-R shift solenoid, 1-3-5 shift
solenoid, and select solenoid O-rings (6) and joints
(8).
a. Remove the O-rings from the solenoids.
b. Use a spring pin remover to remove the spring
pins (7), and then remove the joints.
7. Use a spring pin remover to remove the spring pin
(17), and then remove the select internal lever (16),
and select external lever and washer (13).
8. Remove the relay lever (15).
• Remove the lever bushing (14) from the relay
lever.
N7A1265E
N7A1266E
N7A1267E
Automatic Transmission (Smoother) 7B-123
9. Use a spring pin remover to remove the relay lever
shaft.
10. Use pliers to remove the spring pin; stopper ring
and spring pin; shift lever shaft.
11. Mark where the shift lever shaft and internal lever
align.
12. Pull out the shift lever shaft (18), and remove the
stopper ring (25), internal lever (24), spring (23),
spring seat (22), spring (21), spring seat (20), and
spring (19).
N7A1268E
N7A1269E
N7A1270E
N7A1271E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст