Isuzu N-Series. Manual — part 978
CAB AND CHASSIS ELECTRICAL 8-17
Connector
The connector pin shape determines whether the con-
nector is male or female.
The connector housing configuration does not deter-
mine whether a connector is male or female.
The symbol illustrated in the figure is used as connector,
in the circuit of this section.
Connector is identified with a number.
The applicable terminal number is shown for each con-
nector.
Connector terminal numbers are clearly shown.
Male side connector terminal numbers are in sequence
from upper right to lower left.
Female side connector terminal numbers are in se-
quence from upper left to lower right.
N8A0033E
N8A0034E
N8A0035E
N8A0036E
8-18 CAB AND CHASSIS ELECTRICAL
Notice:
For those connectors on which specific terminal num-
bers or symbols are shown (such as ECM), the terminal
numbers or symbols are used in the circuit diagram, ir-
respective of the above rule.
The connectors used for relays have their own terminal
number assignment, irrespective of the above rule.
N8A0037E
N8A0038E
N8A5038E
CAB AND CHASSIS ELECTRICAL 8-19
Reading The Circuit Diagram
In this manual, each system has its own parts location illustration, circuit diagram and connector configuration used
in the circuit diagram.
Parts Location
The parts location shows the location of the parts 1 and the connector 2 used in each harness routing 3.
N8A0040E
8-20 CAB AND CHASSIS ELECTRICAL
Circuit Diagram
The circuit diagram shows the power supply 4 the load or loads 5 and the grounding point(s) 6.
N8A5040E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст