Isuzu N-Series. Manual — part 1229
遇. Attached accessories list
No.
Name
Model
Quantity
1
Jack
QYL25T
1
2
Spare tire handle
1
3
Multi-purpose handle
1
4
Wheel tire sleeve
1
5
Tool kit
1
6
Open end spanner
10*12
1
7
Open end spanner
14*17
1
8
Open end spanner
19*22
1
9
Double head screwdriver
渍6
1
10
Double head screwdriver
渍8
1
11
Flexible spanner
250mm
1
12
Pliers
200mm
1
13
Grease filling gun assembly
R400g
1
Remark: advise to buy 2 pieces of 渍25伊5m high pressure oil pipe and 2 pieces of 渍19伊5m low pressure oil pipe for e鄄
mergency when your company purchases 2 same model agitating trucks. They are used under the failure that the trans鄄
portation trucks with concrete can't output the stuff, connect the hydraulic oil from the other same model's oil pump,
then reverse the roller tank for outputting the stuff. The two 渍25伊5m pipes are clockwise and counterclockwise high
pressure oil pipe, the one 渍19伊5m pipe is low pressure oil return pipe.
206
OWNER爷S MANUAL
JAC HEAVY DUTY TRUCK
喻. Service and quality guarantee
1. Agitating truck quality guarantee principle
The series agitating truck produced by Anhui JAC Special Automobile Company Ltd complies with the "quality guaran鄄
tee term" of this guarantee principle. Under the working conditions specified as this product operation manual, the mal鄄
function results from the modification of product design, production, material, assembly and testing etc factors are not
qualified or in defect, it's exclude from the guarantee.
Our guarantee principle is mainly for repair, as for issue that can't be repaired, then change the failure parts according鄄
ly. The product after modification repair is excluding from the guarantee of our company.
If the modification part of your agitating truck is failed, please contact with our technical service department. The failure
parts can't be remove without the permission of our company or you will lose the guarantee and our company will not
cover the spare pare and repair cost.
Our company only covers the spare part and repair cost for agitating truck in guarantee, and other indirect loss beyond
the quality guarantee is exclude (road maintenance cost, insurance, spare part damage, business profit etc).
If the customer prevents or refuses the service person of our company from checking the vehicle and making the analy鄄
sis with every excuse, the result according and all the loss is covered by the customer.
2. Agitating truck quality guarantee term and item
1. Chassis
Concerning the chassis service, the customer should perform the run-in and periodically maintenance at the service
nearby recommended by the chassis manufacturer according to the requirements of the quality guarantee manual stip鄄
207
ulated by the chassis manufacturer, the quality guarantee term and item is performed as the chassis manufacturer pro鄄
vision. The customer can go to the chassis service station for guarantee item if problem happened according to valid
quality guarantee manual (perform the run-in and periodically maintenance and stamped by the station), if the customer
didn't perform the run-in and periodically maintenance in the chassis station, if the quality problem occurred, then cus鄄
tomer has to handle it by oneself.
2. Modification part
Modification part guarantee is one year or 30,000km, if our product failed during the period, refer to warranty (except the
special regulations below).If the mileage is obvious small in repair, which compare to vehicle running time, then calcu鄄
late the real mileage as 300km per day since the day of purchase.
a援 The electrical parts, bulb, water pipe, battery (semi-trailer equips with diesel engine) of the modification part etc are
excluded from the guarantee
b援 Hydraulic oil filter, "O" ring etc fast moving parts are excluded from the guarantee.
c援 The guarantee of control soft shaft and oil pump oil seal is half a year.
d援 The product beyond guarantee, lifetime service is offered, all cost is born by the customer.
e援 As for the quality guarantee part, mainly base on repair, as for issue that can't be repaired, then change the failure
parts accordingly.
f援 The product malfunction that not conducted the normal maintenance as this manual will not be guaranteed.
3. Service promise
a. Our company will reply to the customer in the day we received the customer service information. b. As for the modifi鄄
208
OWNER爷S MANUAL
JAC HEAVY DUTY TRUCK
cation part, if our company considers that service has to be performed on the spot, then our promise for the arrival time
to the sport is as follows:
24 hours within 500km from our company headquarter
36 hours within 500km to 1,000km
48 hours when it's above 1,000km.
c. Our company will carry out an interview on the product being sold for 3 to 6 months by telephone, letter, or dispatch鄄
ing person for live interview etc.
d. Our company will conduct the training on modification part maintenance, notice and other factors etc for the cus鄄
tomer.
Remark: all above guarantee term and item are only applicable for concrete agitating truck produced by our company.
峪. Attached documents list
荫
agitating truck operation manual, one piece
荫
agitating truck qualified certificate, one piece
荫
chassis operation manual, one piece
荫
service manual, one piece
209
VEHICLE SPECIFICATION
210
OWNER爷S MANUAL
JAC HEAVY DUTY TRUCK
211
TRACTOR SPECIFICATION
High/Half Height
Roof Cab袁tilt cab
Model
HFC4181KR1
Drive mode
4*2
Engine
Model
Displacement (cc)
Max output power渊Hp/rpm冤
Max torque渊N.m/rpm冤
Transmission
Model
RTO-11509F/RT11509C尧9JS150T-B
S Eaton Technology
Gear position
8 6 4 2 L
7 5 3 1 R
Clutch
Mode
Single plate,dry,screw spring
Real axle
Model
Steyr Technology渊4.8/5.73)
Main parameter
Overall dimension渊mm冤
6095伊2495伊3490/3180
Wheelbase渊mm冤
3500
Tread渊mm冤
2040/1860
Suspension arm渊mm冤
1495/1100
Curb Weight渊Kg冤
7400
GVW渊Kg冤
19400
Max speed渊Km/h冤
90
Tire
12.00-20/12.00R20
WD615.31
WD615.50
9726
9726
310/2200
290/2300
1160/1400
1160/1500
WD615.44 WD615.46
9726
9726
330/2400 360/2400
1250/1450 1460/1450
HFC4181KR1
4*2
RTO-11509F/RT11509C尧9JS150T-B
US Eaton Technology
8 6 4 2 L
7 5 3 1 R
Single, dry plate, diaphragm spring
Steyr Technology渊4.8/5.73)
6095伊2495伊3490/3180
3500
2040/1860
1495/1100
7400
19400
90
12.00-20/12.00R20
WD615.38
9726
380/2400
1460/1400
HFC4183K3R1
4*2
WD615.46 with BOSCH pump
9726
360/2400
1460/1450
9JS150T-B US Eaton
Technology with synchronizer
8 6 4 2 L
7 5 3 1 R
Single, dry plate, diaphragm spring
Steyr Technology渊4.8)
6095伊2495伊3490/3180
3500
2040/1860
1495/1100
7400
19400
90
12.00-20/12.00R20
High/Half Height
Roof Cab袁tilt cab
Model
HFC4180KR1K3
Drive mode
4*2
Engine
Model
Displacement (cc)
Max output power渊Hp/rpm冤
Max torque渊N.m/rpm冤
Transmission
Model
RTO-11509F/RT11509C尧
9JS150T-B
US Eaton Technology
Gear position
8 6 4 2 L
7 5 3 1 R
Clutch
Mode
Single plate,dry,screw spring
Real axle
Model
Steyr Technology渊4.8)
Main parameter
Overall dimension渊mm冤
6095伊2495伊3490/3180
Wheelbase渊mm冤
3500
Tread渊mm冤
2040/1860
Suspension arm渊mm冤
1495/1100
Curb Weight渊Kg冤
7400
GVW渊Kg冤
19400
Max speed渊Km/h冤
90
Tire
12.00-20/12.00R20
WP10.290
9.726
290/2200
1160/1200-1600
WP10.336
9.726
336/2200
1250/1200-1600
HFC4181KR1K3
4*2
12JS160T/12JS160TA
US Eaton Technology
12/6 10/4 8/2
11/5 9/3 7/1 R2/R1
Single, dry plate, diaphragm spring
Steyr Technology渊4.8)
6095伊2495伊3490/3180
3500
2040/1860
1495/1100
7400
19400
90
12.00-20/12.00R20
HFC4181KR1K3
4*2
WP10.336
9.726
336/2200
1250/1200-1600
12JS160T/12JS160TA
US Eaton Technology
12/6 10/4 8/2
11/5 9/3 7/1 R2/R1
Single, dry plate, diaphragm spring
Steyr Technology渊4.8)
6095伊2495伊3490/3180
3500
2040/1860
1495/1100
7400
19400
90
12.00-20/12.00R20/11.00R22.5
212
OWNER爷S MANUAL
JAC HEAVY DUTY TRUCK
213
High/Half Height
Roof Cab袁tilt cab
Model
HFC4253K3R1
Drive mode
6*4
Engine
Model
Displacement (cc)
Max output power渊Hp/rpm冤
Max torque渊N.m/rpm冤
Transmission
Model
9JS150T-B
US Eaton Technology with synchronizer
Gear position
8 6 4 2 L
7 5 3 1 R
Clutch
Mode
Single, dry plate,
diaphragm spring
Real axle
Model
Steyr Technology渊4.8)
Main parameter
Overall dimension渊mm冤
6685伊2495伊3490/3180
Wheelbase渊mm冤
3050+1350
Tread渊mm冤
2040/1860
Suspension arm渊mm冤
1495/790
Curb Weight渊Kg冤
8800
GVW渊Kg冤
33800
Max speed渊Km/h冤
90
Tire
12.00-20/12.00R20
WD615.38 with BOSCH pump
9726
380/2400
1460/1400
ISM440E 20(CUMMINS made in USA冤
10800
440/1800
2100/1200
HFC4253K3R1
6*4
ZF 16S 221
ZF made in Germany
1 3 5 7
R 2 4 6 8
SACHS Single plate,dry,diaphragm
spring,SACHS made in Germany
Steyr Technology渊4.8)
6685伊2495伊3490/3180
3050+1350
2040/1860
1495/790
8800
33800
90
12.00砸22.5
HFC4251K1R1
6*4
RTO-11509F/RT11509C
US Eaton Technology
8 6 4 2 L
7 5 3 1 R
Single, dry plate, diaphragm spring
Steyr Technology渊4.8/5.73)
6685伊2495伊3490/3180
3050+1350
2040/1860
1495/790
8800
33800
90
12.00-20/12.00R20
WD615.38
9726
380/2400
1460/1400
WD615.46 WD615.44
9726
9726
360/2400 330/2400
1460/1450 1250/1450
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст