Isuzu N-Series. Manual — part 146
REAR SUSPENSION 3D-7
Tighten:
• Shackle pin nut to
NHR, NKR Single tire, Flat low: 202 N
⋅m (20.6 kg⋅m/
149 lb
⋅ft)
NKR Dual tire, NPR, NQR, NPS: 332 N
⋅m (33.8 kg⋅m/
244 lb
⋅ft)
5. Shackle Pin Nut and Washer
Finger tighten first, and tighten to specified torque
after lowering the vehicle to ground.
Tighten:
• Spring pin nut to
NHR: 137 N
⋅m (14 kg⋅m/101 lb⋅ft)
Except NHR: 177 N
⋅m (18 kg⋅m/130 lb⋅ft)
6. Shock Absorber
Tighten:
• Shock absorber upper nut to
NHR, NKR single tire: 61 N
⋅m (6.2 kg⋅m/45 lb⋅ft)
Except above models: 95 N
⋅m (9.7 kg⋅m/70 lb⋅ft)
• Shock absorber lower nut to
NHR, NKR Single tire: 61 N
⋅m (6.2 kg⋅m/45 lb⋅ft)
NKR Dual Tire: 95 N
⋅m (9.7 kg⋅m/70 lb⋅ft)
NPR, NPS, NQR: 40 N
⋅m (4.1 kg⋅m/30 lb⋅ft)
N3A0416E
N3A0425E
3D-8 REAR SUSPENSION
Stabilizer
Legend
1. Nut
8. Rod link cap
2. Washer
9. Stabilizer bar
3. Rubber bushing
10. Nut
4. Rubber bushing
11. Nut
5. Washer
12. Bolt
6. Stud bolt and spring washer
13. Rod link
7. Bolt
N3A0373E
REAR SUSPENSION 3D-9
Removal
1. Nut
2. Washer
3. Rubber Bushing
4. Rubber Bushing
5. Washer
6. Stud Bolt and Spring Washer
7. Bolt
8. Rod Link Cap
9. Stabilizer Bar
10. Nut
11. Nut
12. Bolt
13. Rod Link
Inspection and Repair
Make necessary correction or parts replacement if wear,
damage or any other abnormal conditions are found
through inspection.
Stabilizer
Inspect the stabilizer bar and attachments for the follow-
ing conditions:
1. Cracks, bends or damage to the bar.
2. Worn bushings.
3. Damaged brackets.
• Replace any worn or damaged parts.
Installation
Notice:
During installation, place the vehicle on flat ground and
tighten each part to the specified torque.
1. Stabilizer Bar
2. Rod Link
3. Rod Link Cap
4. Bolt
5. Nut
6. Bolt
7. Nut
Tighten:
• Nut to
Rod link cap nut: 57 N
⋅m (5.8 kg⋅m/42 lb⋅ft)
Rod link bracket nut: 127 N
⋅m (13 kg⋅m/94 lb⋅ft)
8. Stud Bolt and Spring Washer
9. Washer
10. Rubber Bushing
11. Rubber Bushing
12. Washer
13. Nut
N3A0426E
N3A0427E
N3A0427E
3D-10 REAR SUSPENSION
Tighten:
• Stud bolt and nut to
Stud bolt: 117 N
⋅m (11.9 kg⋅m/86 lb⋅ft)
Nut: 29 N
⋅m (3.0 kg⋅m/22 lb⋅ft)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст