Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Manual — part 970
WIPER/WASHER SYSTEM
8B–1
TROOPER
BODY AND ACCESSORIES
WIPER / WASHER SYSTEM
CONTENTS
Service Precaution
8B–1
. . . . . . . . . . . . . . . . . . . . . .
Windshield Wiper/Washer System
8B–2
. . . . . . . . .
General Description
8B–2
. . . . . . . . . . . . . . . . . . . . .
Windshield Wiper And Washer Switch
8B–2
. . . . .
Removal and Installation
8B–2
. . . . . . . . . . . . . . .
Windshield Wiper Motor
8B–2
. . . . . . . . . . . . . . . . . .
Removal
8B–2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8B–2
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Windshield Washer Motor
8B–3
. . . . . . . . . . . . . . . .
Removal
8B–3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8B–3
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Windshield Wiper Linkage
8B–4
. . . . . . . . . . . . . . . .
Windshield Wiper Linkage and Associated
Parts
8B–4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removal
8B–4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8B–4
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Windshield Wiper Arm/Blade
8B–5
. . . . . . . . . . . . . .
Removal
8B–5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8B–5
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Windshield Wiper Blade Rubber
8B–6
. . . . . . . . . . .
Removal
8B–6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8B–6
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear Wiper/Washer System
8B–7
. . . . . . . . . . . . . .
General Description
8B–7
. . . . . . . . . . . . . . . . . . . . .
Rear Wiper and Washer Switch
8B–7
. . . . . . . . . . .
Removal
8B–7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8B–7
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear Wiper Motor
8B–8
. . . . . . . . . . . . . . . . . . . . . . .
Removal
8B–8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8B–8
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Alarm & Relay Control Unit
8B–9
. . . . . . . . . . . . . . .
Removal
8B–9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8B–9
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear Washer Motor
8B–9
. . . . . . . . . . . . . . . . . . . . . .
Removal
8B–9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8B–9
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear Wiper Arm/Blade
8B–10
. . . . . . . . . . . . . . . . . . .
Removal
8B–10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8B–10
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear Washer Nozzle
8B–10
. . . . . . . . . . . . . . . . . . . . .
Removal
8B–10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8B–10
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear Washer Nozzle Angle Adjustment
8B–10
. . .
Rear Wiper Blade Rubber
8B–11
. . . . . . . . . . . . . . . .
Removal and Installation
8B–11
. . . . . . . . . . . . . . .
Main Data and Specifications
8B–11
. . . . . . . . . . . . .
Service Precaution
WARNING: THIS VEHICLE HAS A SUPPLEMENTAL
RESTRAINT SYSTEM (SRS). REFER TO THE SRS
COMPONENT AND WIRING LOCATION VIEW IN
ORDER TO DETERMINE WHETHER YOU ARE
PERFORMING SERVICE ON OR NEAR THE SRS
COMPONENTS OR THE SRS WIRING. WHEN YOU
ARE PERFORMING SERVICE ON OR NEAR THE SRS
COMPONENTS OR THE SRS WIRING, REFER TO
THE SRS SERVICE INFORMATION. FAILURE TO
FOLLOW WARNINGS COULD RESULT IN POSSIBLE
AIR BAG DEPLOYMENT, PERSONAL INJURY, OR
OTHERWISE UNNEEDED SRS SYSTEM REPAIRS.
CAUTION: Always use the correct fastener in the
proper location. When you replace a fastener, use
ONLY the exact part number for that application.
ISUZU will call out those fasteners that require a
replacement after removal. ISUZU will also call out
the fasteners that require thread lockers or thread
sealant. UNLESS OTHERWISE SPECIFIED, do not
use supplemental coatings (Paints, greases, or other
corrosion inhibitors) on threaded fasteners or
fastener joint interfaces. Generally, such coatings
adversely affect the fastener torque and the joint
clamping force, and may damage the fastener. When
you install fasteners, use the correct tightening
sequence and specifications. Following these
instructions can help you avoid damage to parts and
systems.
8B–2
WIPER/WASHER SYSTEM
Windshield Wiper/Washer System
General Description
The circuit consists of the starter switch, windshield wiper
& washer switch, windshield wiper motor, windshield
washer motor and windshield intermittent relay.
When the wiper & washer switch is turned on with the
starter switch on, the battery voltage is applied to the
wiper motor to activate the wiper.
The washer motor squirts glass cleaning fluid while the
washer switch is being pushed. The intermittent relay is
used to control motion of the wiper.
Windshield Wiper And Washer Switch
Removal and Installation
Refer to the Lighting Switch (Combination Switch) in
Lighting System section.
Windshield Wiper Motor
Removal
1. Disconnect the battery ground cable.
2. Disconnect the connector.
3. Remove 4 mounting bolts.
4. Remove the windshield wiper motor(1).
880RW007
Installation
To install, follow the removal steps in the reverse order.
WIPER/WASHER SYSTEM
8B–3
Windshield Washer Motor
Removal
1. Disconnect the battery ground cable.
2. Remove the fender inner liner (right side) (1).
3. Remove the screws and then remove the front
combination light(2).
4. Remove 2 screws, the filler neck and the hose.
5. Disconnect the windshield washer motor connector
and remove the washer tank (4).
6. Pull the windshield washer motor(3) from the washer
tank(4).
880RS006
Installation
To install, follow the removal steps in the reverse order.
8B–4
WIPER/WASHER SYSTEM
Windshield Wiper Linkage
Windshield Wiper Linkage and Associated Parts
880RW008
Legend
(1) Windshield Wiper Arm/Blade
(2) Vent Cowl Cover
(3) Windshield Wiper Linkage Assembly
(4) Windshield Wiper Motor
Removal
1. Disconnect the battery ground cable.
2. Remove the windshield wiper arm/blade.
3. Remove the windshield wiper motor.
4. Remove the pivot assembly mounting nuts, fixing
screws and then remove the vent cowl cover.
5. Take out the windshield wiper linkage assembly from
the opening of the cowl.
Installation
To install, follow the removal steps in the reverse order.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст