Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Manual — part 11
HEATING, VENTILATION AND AIR CONDITIONING (HVAC) 1A–15
Blower Motor
Blower Motor and Associated Parts
873RS004
Legend
(1) Blower Motor Connector
(2) Blower Motor Assembly
(3) Clip
(4) Fan
(5) Blower Motor
(6) Attaching Screw
Removal
1. Disconnect the battery ground cable.
2. Remove blower motor connector.
3. Remove attaching screw.
4. Remove blower motor assembly.
5. Remove clip.
6. Remove fan.
7. Remove blower motor.
Installation
To install, follow the removal steps in the reverse order.
1A–16 HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
Rear Heater Duct, Defroster Nozzle and Ventilation Duct
Rear Heater Duct, Defroster Nozzle, Ventilation Duct and Associated Parts
840R200009
Legend
(1) Defroster Nozzle
(2) Cross Beam Assembly
(3) Center Ventilation Duct and Side Defroster
Duct
(4) Instrument Panel Bracket W/Suspension
Control Unit
(5) Instrument Panel Assembly
(6) Rear Heater Duct
(7) Ventilation Lower Duct
Removal
1. Disconnect the battery ground cable.
2. Remove instrument panel assembly.
D
Refer to
Instrument Panel Assembly in Body and
Accessories section.
3. Remove center ventilation duct and side defroster
duct.
D
Remove 5 screws.
4. Remove instrument panel brackets w/suspension
control unit.
D
Refer to
Cross Beam Assembly in Body and
Accessories section.
5. Remove cross beam assembly.
D
Refer to
Cross Beam Assembly in Body and
Accessories section.
6. Remove ventilation lower duct.
HEATING, VENTILATION AND AIR CONDITIONING (HVAC) 1A–17
7. Remove rear heater duct.
D
Remove foot rest carpet and 3 clips.
8. Remove defroster nozzle.
Installation
To install, follow the removal steps in the reverse order,
noting the following point:
1. Connect each duct and nozzle securely leaving no
clearance between them and making no improper
matching.
1A–18 HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
Air Conditioning System
General Description
Air Conditioning Refrigerant Cycle Construction
C01RY00013
Legend
(1) Duct Sensor
(2) Evaporator Core
(3) Evaporator Assembly
(4) Temperature Sensor
(5) Blower Motor
(6) Expansion Valve
(7) Pressure Switch
(8) Receiver/Drier
(9) Condenser
(10) Compressor
(11) Magnetic Clutch
(12) Mode (HEAT) Control Door
(13) Temp. Control Door (Air Mix Door)
(14) Heater Core
(15) Mode (VENT) Control Door
(16) Heater Unit
(17) Mode (DEF) Control Door
The refrigeration cycle includes the following four
processes as the refrigerant changes repeatedly from
liquid to gas and back to liquid while circulating.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст