Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Manual — part 1022
8H–12 SECURITY AND LOCKS
Tailgate Lock Assembly (LH)
Tailgate Lock Assembly (LH) and
Associated Parts
684RW004
Legend
(1) Tailgate Trim Panel(LH)
(2) Waterproof Sheet
(3) Tailgate Lock Assembly
Removal
1. Disconnect the battery ground cable.
2. Remove the tailgate trim panel (LH).
D
Refer to the Tailgate Trim Panel (LH) in
Exterior/Interior Trim section.
3. Taking notice of the tailgate harness, peel the
waterproof sheet off the tailgate panel carefully and
then remove the waterproof sheet.
684RS005
SECURITY AND LOCKS
8H–13
4. Disconnect the locking links (arrow marks positions),
remove three fixing screws and then remove the
tailgate lock assembly (LH).
683RS003
Legend
(1) To Inside Lock Knob
(2) To Actuator
Installation
To install, follow the removal steps in the reverse order,
noting the following points.
1. Apply chassis grease to the lock assembly and striker
moving surface.
2. Tighten the tailgate lock assembly fixing screws to the
specified torque.
Torque: 7 N·m (61 lb in)
3. Check that the tailgate lock operates correctly after
installing it.
8H–14 SECURITY AND LOCKS
Tailgate Lock Assembly (RH)
Tailgate Lock Assembly (RH) and Associated Parts
684R200011
Legend
(1) Tailgate Trim Panel (RH)
(2) Waterproof Sheet
(3) Tailgate Lock Seal
(4) Clip
(5) Screw
(6) Tailgate Lock Assembly (RH)
Removal
1. Disconnect the battery ground cable.
2. Remove the tailgate trim panel (RH).
D
Refer to Tailgate Trim Panel (RH) in Exterior/Interior
Trim section.
3. Peel the waterproof sheet off the tailgate panel
carefully and then remove the waterproof sheet.
4. Remove three fixing bolts and then remove the
tailgate lock assembly (RH).
683RW009
SECURITY AND LOCKS
8H–15
5. Remove the tailgate lock seal fixing clip(1) and then
remove the tailgate lock seal(2).
683RW008
Installation
To install, follow the removal steps in the reverse order,
noting the following points.
1. Apply chassis grease to the lock assembly and striker
moving surface.
2. Tighten the tailgate lock assembly fixing bolts to the
specified torque.
Torque: 11 N·m (95 lb in)
3. Check that the tailgate lock operates correctly after
installing it.
Tailgate Inside Lock Knob
Removal
1. Disconnect the battery ground cable.
2. Remove the tailgate trim panel (LH)(2).
D
Refer to the Tailgate Trim Panel (LH) in
Exterior/Interior Trim section.
3. Take care of cushion to turn the lock knob
counterclockwise and then remove the tailgate inside
lock knob(1).
683RW007
Installation
To install, follow the removal steps in the reverse order.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст