Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Manual — part 32
HEATING, VENTILATION AND AIR CONDITIONING (HVAC) 1A–99
Chart 2: Ambient Sensor
D08R200030
Step
Action
Value(s)
Yes
No
1
Disconnect ambient sensor connector. (No.C–19)
Is performance of the ambient sensor normal? (Refer
to the
later section on “Individual inspection”)
—
Go to
Step 2
Replace the
ambient
sensor
2
Connect the ambient sensor connector.
Is resistance between the harness side connector
No.I20–2 and No.I20–11 normal?
Refer to the
later section
on “Individual
inspection”
Go to
Step 4
Go to
Step 3
3
Repair an open circuit between terminal No.I20–2 and
No.C19–1 or No.I20–11 and No.C19–2.
Is the action complete?
—
Verify repair
—
4
Replace the auto air conditioner control unit.
Is the action complete?
—
Verify repair
—
1A–100 HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
Chart 3: Sun Sensor
D08R200059
Step
Action
Value(s)
Yes
No
1
Disconnect the sun sensor connector. (No.I–15)
Is performance of the sun sensor normal? (Refer to the
later section on individual inspection)
—
Go to
Step 2
Replace the
sun sensor.
2
Is there continuity between the harness side connector
terminal No.I20–3 and No.I15–2?
—
Go to
Step 4
Go to
Step 4
3
Repair an open circuit between terminal No.I20–3 and
No.I15–2.
Is the action complete?
—
Go to
Step 2
—
4
Is there continuity between the harness side connector
terminal No.I20–11 and No.I15–1?
—
Go to
Step 6
Go to
Step 5
5
Repair an open circuit between terminal No.I20–11 and
I15–1.
Is the action complete?
—
Go to
Step 4
—
6
Replace the auto air conditioner control unit.
Is the action complete?
—
Verify repair
—
HEATING, VENTILATION AND AIR CONDITIONING (HVAC) 1A–101
Inspection of the Intake Actuator System
D08R200060
1A–102 HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
Condition
Possible cause
Correction
Does not work at all
—
Refer to
Chart A
Control failure
—
Refer to
Chart B
Chart A: Does Not Work At All
Step
Action
Value(s)
Yes
No
1
Is the fuse FL–1 normal?
—
Go to
Step 2
Replace the
fuse
2
Is the fuse F–7 normal?
—
Go to
Step 3
Replace the
fuse
3
Is the relay X–1 normal?
—
Go to
Step 4
Replace the
relay
4
Turn on the ignition switch. (the engine is run.)
Is the battery voltage applied between the harness side
connector terminal No.C33–3 and ground?
Approx 12V
Go to
Step 6
Go to
Step 5
5
Repair an open circuit between terminal No.C33–3 and
No.X1–1.
Is the action complete?
—
Go to
Step 4
—
6
Is the battery voltage applied between the harness side
connector terminal No.C33–4 and ground?
Approx 12V
Go to
Step 8
Go to
Step 7
7
Replace the intake actuator motor.
Is the action complete?
—
Go to
Step 6
—
8
Is there continuity between the harness side connector
terminal No.I19–11 and No.C33–4?
—
Go to
Step 10
Go to
Step 9
9
Repair an open circuit between No.I19–11 and C33–4.
Is the action complete?
—
Verify repair
—
10
Replace the auto air conditioner control unit.
Is the action complete?
—
Verify repair
—
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст