Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Manual — part 986
METER AND GAUGE
8E–7
Meter Assembly W/O TOD–2
Connector No. I–9
Terminal
Function
1
A/T oil temp warning light
2
Seat belt warning light
3
Check trans warning light
4
Brake warning light
5
Check engine warning light
6
Charge warning light
7
Lighting switch
8
Illumination controller
9
Tachometer
10
D position (A/T)
11
—
12
A/T shift indicator control unit
13
—
14
2 position (A/T)
15
Starter switch
16
Ground (Gauge)
17
Cruise set indicator light
18
Cruise main indicator light
19
4WD indicator light
20
—
21
Winter drive indicator light
22
Oil pressure warning light
23
—
24
Air bag warning light
25
Power drive indicator light
26
—
27
Up shift indicator light (–)
28
Turn signal indicator light (Left)
29
Up shift indicator light (+)
30
Ground (Warning)
Connector No. I–10
Terminal
Function
1
Turn signal indicator light (Right)
2
L position (A/T)
3
R position (A/T)
4
Engine coolant temperature gauge
5
Speedometer
6
—
7
—
8
Battery (+)
9
—
10
—
11
P position (A/T)
12
N position (A/T)
13
3 position (A/T)
14
High-beam indicator light (–)
15
High-beam indicator light (+)
16
ABS indicator light
17
—
18
Fuel warning light
19
Oil pressure gauge
20
Fuel gauge
21
—
22
Reduced power
8E–8
METER AND GAUGE
Meter Assembly W/TOD–1
825RW035
METER AND GAUGE
8E–9
Meter Assembly W/TOD–2
Connector No. I–9
Terminal
Function
1
—
2
Air bag warning light
3
A/T oil temp warning light
4
Charge warning light
5
Seat belt warning switch
6
Check trans warning light
7
Brake warning light
8
—
9
Tachometer
10
—
11
Turn signal indicator light (Left)
12
A/T shift indicator control unit
13
2 position (A/T)
14
D position (A/T)
15
Rear (TOD)
16
Auto (TOD)
17
Check (TOD)
18
Cruise set indicator light
19
Cruise main indicator light
20
Oil pressure warning light
21
Front “1” (TOD)
22
Front “2” (TOD)
23
Front “3” (TOD)
24
Lighting switch
25
Illumination controller
26
Starter switch
27
—
28
Winter drive indicator light
29
Power drive indicator light
30
—
Connector No. I–10
Terminal
Function
1
Turn signal indicator light (Right)
2
L position (A/T)
3
R position (A/T)
4
Ground (Warning)
5
Speedometer
6
—
7
—
8
Ground (Gauge)
9
Check engine warning light
10
Battery (+)
11
P position (A/T)
12
N position (A/T)
13
3 position (A/T)
14
High beam indicator light (–)
15
High beam indicator light (+)
16
ABS indicator light
17
—
18
Fuel warning light
19
—
20
Fuel gauge
21
Reduced power
22
Engine coolant temperature gauge
8E–10 METER AND GAUGE
Removal
1. Disconnect the battery ground cable.
2. Remove the front console assembly(1).
Refer to the Instrument Panel Assembly in Body
Structure section.
3. Remove the lower cluster assembly(2).
Refer to the Instrument Panel Assembly in Body
Structure section.
4. Remove the instrument panel driver lower cover(3).
Refer to the Instrument Panel Assembly in Body
Structure section.
740R200051
5. Remove four fixing screws and disconnect the meter
connectors to remove the meter assembly(5).
825RW031
CAUTION: The removed meter assembly should be
placed upright or with its face side up.
Installation
To install, follow the removal steps in the reverse order.
Warning Light Bulb, Indicator Light Bulb, Illumination Light Bulb,
A/T Indicator Light Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the meter assembly(1).
Refer to the Meter Assembly removal steps in this
section.
3. Hold the bulb socket by hand and rotate it
counterclockwise to remove the socket & bulb(2)
from the meter body.
825RW032
Installation
To install, follow the removal steps in the reverse order.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст