Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Manual — part 1656
8F–66
BODY STRUCTURE
Spare Tire Carrier
Parts Location
530RX005
EndOFCallout
Removal
1. Remove the spare tire.
2. Remove the spare tire carrier by using spare tire
carrier nut wrench J–34355.
Installation
1. Spare tire carrier.
• Tighten the carrier fixing bolts to the specified
torque.
Torque : 31 N·m (23 lb ft)
2. Spare tire
• Tighten the spare tire fixing bolts to the specified
torque.
Torque : 118 N·m (87 lb ft)
Legend
(1) Spare Tire
(2) Spare Tire Carrier
BODY STRUCTURE
8F–67
Spare Tire Hanger
Parts Location
530RY00005
EndOFCallout
Legend
(1) Spare Tire Hanger Assembly Fixing Bolt
(2) End Cross Member
(3) Rear Suspension · Cross Member
(4) Spare Tire Support
(5) Spare Tire Support Fixing Bolt
(6) Spare Tire Stopper Rubber (RH)
(7) Spare Tire Stopper Rubber (Front)
(8) Stopper Rubber Fixing Clip
(9) Spare Tire
(10) Spare Tire Stopper Rubber (LH)
(11) Spare Tire Hanger Assembly
8F–68
BODY STRUCTURE
Removal
1. Open the hatch gate and tail gate.
2. Remove the spare tire (3).
• Put the spare tire handle (1) to the center of
upper side of rear bumper (2) and turn
counterclockwise. Put spare tire down.
530RW005
3. Remove the spare tire support.
• Remove the four bolts that are fixed to frame
cross member.
4. Remove the spare tire hanger assembly.
• Remove the two fixing bolts.
Installation
To install, follow the removal steps in the reverse order,
noting the following points.
1. Install the spare tire firmly.
2. Tighten the spare tire support fixing bolts to the
specified torque.
Torque : 40 N·m (30 lb ft)
3. Tighten the spare tire hanger fixing bolts to the
specified torque.
Torque : 19 N·m (14 lb ft)
BODY STRUCTURE
8F–69
Windshield
Parts Location
607R100001
EndOFCallout
Legend
(1) Windshield Wiper Arm
(2) Windshield Upper Molding
(3) Windshield
(4) Windshield Side Molding
(5) Windshield Support
(6) Front Cowl Cover
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст