Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Manual — part 23
HEATING, VENTILATION AND AIR CONDITIONING (HVAC) 1A–63
Special Tools
ILLUSTRATION
TOOL NO.
TOOL NAME
J-33939
Drive plate holder
J-33944-A
Drive plate puller
J-33944-4
Forcing screw
J-38424
Pulley puller pilot
J-8433
Pulley puller
J-24092-2
Pulley puller leg
ILLUSTRATION
TOOL NO.
TOOL NAME
J-33940-A
Pulley installer
J-8092
Drive handle
1A–64 HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
Automatic Air Conditioning System
General Description
Using a variety of sensors, this automatic air conditioner
accurately senses outside air temperature, solar
radiation quantity, evaporator’s blowing temperature, and
interior temperature, then enters these data to the
automatic air conditioner control unit (equipped with the
built-in micro-computer). The data provided to the control
unit enables to automatically control blow temperature
and blow air quantity, turn on or off the compressor and
switch the blow port as well as switching between the
fresh air intake and interior air circulation.
Resetting the automatic function allows you to switch to
the manual control mode.
The self-diagnoisis function of the automatic air
conditioner control unit (with the built-in micro-computer)
allows the unit to access and diagnose a failed part easier
and quicker.
Automatic Air Conditioner Parts Configuration
865R200050
Legend
(1) In Car Sensor
(2) Sun Sensor
(3) Ambient Sensor
(4) Intake Actuator
(5) Blower Unit
(6) Max – High Relay
(7) Display
(8) Audio & Switch Assembly
(9) Evaporator Assembly
(10) Duct Sensor
(11) Mix Actuator
(12) Heater Unit
(13) Automatic Air Conditioner Control Unit
(14) Mode Actuator
HEATING, VENTILATION AND AIR CONDITIONING (HVAC) 1A–65
Circuit Diagram
D01R200010
1A–66 HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
D01R200011
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст