Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Manual — part 61
REAR SUSPENSION
3D–15
Installation
1. Install rubber bushing.
2. Install bracket to axle housing and tighten to the
specified torque.
Torque: 25 N·m (19 lb ft)
3. Install link.
4. Install bolt and nut, then tighten the nut to the
specified torque.
Torque: 31 N·m (27 lb ft)
460RW010
3D–16
REAR SUSPENSION
Main Data and Specifications
General Specifications
Rear suspension
Type
5–Link, coil spring type with stabilizer bar.
Coil spring
Free length
370.5 mm (14.59 in)
Spring diameter
12.4 mm (0.49 in)
Coil diameter
(inner)
105 mm (4.13 in)
Effective No. of
turns
5.21
Total No. of turns
6.71
Shock absorber
Type
Hydraulic, double acting, telescopic
Piston diameter
30 mm (1.18 in)
Stroke
159 mm (6.26 in)
Extended length
518 mm (20.39 in)
Compressed
length
359 mm (14.13 in)
Stabilizer bar
Diameter
18 mm (0.71 in)
REAR SUSPENSION
3D–17
Torque Specifications
E03R200002
3D–18
REAR SUSPENSION
Special Tools
ILLUSTRATION
TOOL NO.
TOOL NAME
J–39214
Remover and Installer;
Trailing link bushing
J–43008
Remover and Installer;
Upper link bushing
J–39792
Remover and Installer;
Lateral rod bushing
(Axle side)
J–39215
Remover and Installer;
Lateral rod bushing
(Frame side)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст