Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Manual — part 567
1A–136 HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
In Car Sensor
865RY00020
Legend
(1) In Car Sensor
(2) Automatic Air Conditioner Control Unit
Removal
1. Disconnect the battery ground cable.
2. Remove the automatic air conditioner control unit.
D
Refer to the automatic air conditioner control unit
section.
3. Remove in car sensor.
Installation
To install, follow the removal step in the reverse order.
Ambient Sensor
875R200030
Legend
(1) Ambient Sensor
(2) Sensor Connector
(3) Radiator Grille
Removal
1. Disconnect the battery ground cable.
2. Remove radiator grille.
D
Refer to Radiator Grille in Body Structure section.
3. Disconnect the ambient sensor connector.
4. Remove the ambient sensor.
Installation
To install, follow the removal step in the reverse order.
HEATING, VENTILATION AND AIR CONDITIONING (HVAC) 1A–137
Sun Sensor
826RY00012
Legend
(1) Sun Sensor
Removal
1. Disconnect the battery ground cable.
2. Remove the sun sensor.
3. Disconnect the sun sensor connector.
Installation
To install, follow the removal step in the reverse order.
Duct Sensor
874R200019
Legend
(1) Sensor Part
(2) Evaporator Core
(3) Evaporator Assembly
(4) Duct Sensor Assembly
Removal
1. Disconnect the battery ground cable.
2. Remove the evaporator assembly.
D
Refer to the evaporator assembly in this section.
3. Remove the duct sensor assembly.
Installation
To install, follow the removal step in the reverse order.
1A–138 HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
Mode Actuator
860R200009
Legend
(1) Driver Knee Bolster Assembly
(2) Instrument Panel Driver Lower Cover
Assembly
(3) Mode Actuator
(4) Actuator Rod
Removal
1. Disconnect the battery ground cable.
2. Remove the instrument panel driver lower cover
assembly.
3. Remove the driver knee bolster assembly.
D
Refer to the Instrument Panel Assembly in Body
Structure section.
4. Remove the actuator rod.
5. Remove the mode actuator.
Installation
To install, follow the remove step in the reverse order.
Mix Actuator
860RY00009
Legend
(1) Instrument Panel Assembly
(2) Actuator Rod
(3) Mix Actuator
(4) Instrument Panel Center Bracket
Removal
1. Disconnect the battery ground cable.
2. Remove the instrument panel assembly.
D
Refer to the Instrument Panel Assembly in Body
and Accessories section.
3. Remove the instrument panel center bracket.
4. Remove the actuator rod.
5. Remove the mix actuator.
Installation
To install, follow the remove step in the reverse order.
HEATING, VENTILATION AND AIR CONDITIONING (HVAC) 1A–139
Intake Actuator
873RY00004
Legend
(1) Evaporator Assembly
(2) Intake Actuator
(3) Intake Actuator Connector
Removal
1. Disconnect the battery ground cable.
2. Discharge and recover refrigerant.
D
Refer to Refrigerant Recovery in this section.
3. Remove the evaporator assembly.
D
Refer to Evaporator Assembly section.
4. Disconnect the intake actuator connector.
5. Remove the intake actuator.
Installation
To install, follow the remove step in the reverse order.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст