Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Manual — part 112
DRIVE LINE CONTROL SYSTEM (TOD)
4B2–66
Table (1) (high position standard)
Case
Continuity between terminals:
26 and
24
39 and
24
25 and
24
38 and
24
1
NO
NO
NO
YES
2
NO
YES
NO
YES
3
YES
YES
NO
YES
Table (2) (low position standard)
Continuity between terminals:
26 and 24
39 and 24
25 and 24
38 and 24
YES
NO
YES
YES or NO
Table (3) (high position standard)
Case
Continuity between the connector (A–2)
terminals:
6 and 5
1 and 5
2 and 5
3 and 5
1
NO
NO
NO
YES
2
NO
YES
NO
YES
3
YES
YES
NO
YES
Table (4) (low position standard)
Continuity between the connector (A–2) terminals:
6 and 5
1 and 5
2 and 5
3 and 5
YES
NO
YES
YES or NO
4B2–67
DRIVE LINE CONTROL SYSTEM (TOD)
Trouble Diagnosis Depending on The
Status of TOD Indicator
Functional check with TOD indicator light is conducted
prior to check on Charts A–H.
D
After the starter is switched on, check and see if the
status has become as tabulated below.
C04R200003
D
If the status is as tabulated above, there is no
problem. If not as tabulated above, inspect the
harness.
DRIVE LINE CONTROL SYSTEM (TOD)
4B2–68
Chart A
Indicator drive circuit
Function of circuit
The circuit informs the indicator of the working condition of the ECU.
Fail condition
All the TOD indicator lamps and CHECK lamp are lit.
Indicator lamp state
—
TOD switch position
2H/TOD/4L
—
D04R200023
4B2–69
DRIVE LINE CONTROL SYSTEM (TOD)
Step
Action
Yes
No
1
Turn on the starter switch.
Is the battery voltage observed between terminals 14 and 47?
The ECU has
failed. Replace
the ECU.
Go to
Step 2
Check the battery
circuit.
Go to
Step 2
2
Check that all the parts are mounted.
Is this step complete?
Repeat the
“Diagnosis Flow”.
Return to Step 2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст