Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Manual — part 741
6D3–14 STARTING AND CHARGING SYSTEM
If the measured value is out of standard, insert dust cover,
or disassemble and adjust.
065RW019
Characteristic Test
For easily confirming the characteristics, conduct the no
load test as follows:
Rating as short as 30 seconds requires rapid testing.
Fix the starter on the test bench, and wire as shown in
illustration. When the switch is closed, the current flows
and the starter runs under no load. At this time, measure
current, voltage and speed to check if they satisfy the
standard.
065RW020
Legend
(1) Volt Meter
(2) Tachometer
(3) Battery
(4) Ammeter
(5) Switch
6D3–15
STARTING AND CHARGING SYSTEM
Main Data and Specifications
General Specifications
Model
HITACHI GD003138
Rating
Voltage
12 V
Output
1.4 Kw
Time
30 sec
Number of teeth of pinion
9
Rotating direction(as viewed from pinion)
Clockwise
Weight(approx.)
34 N (7.6 lb)
No load characteristics
Voltage /Current
11V/90A or less
Speed
2700rpm or more
Load characteristics
Voltage/current
8.4V/250A
Torque
7.3N·m(64lb·in.) or more
Speed
1200rpm or more
Locking characteristics
Voltage/current
3V/750A or less
Torque
19N·m(14 lb ft) or more
6D3–16 STARTING AND CHARGING SYSTEM
Torque Specifications
E06RW023
6D3–17
STARTING AND CHARGING SYSTEM
060R200207
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст