Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Manual — part 1663
SEATS
8G–13
Removal
1. Fold the rear seat backs forward.
• Pull up on the left and right release knobs.
2. Remove the rear seat leg covers.
• Remove the screw and clip from each.
3. Remove the rear seat assembly.
• Remove both left and right seat assembly fixing
screws, and pull the seat lock strap to release the
seat lock.
4. Remove the device covers (left and right).
• Remove the three screws from each.
5. Remove the release knobs (left and right).
6. Remove the rear seat back assemblies (left and
right).
• Remove both reclining device fixing bolts from
the sides of the seat backs.
7. Remove the headrests.
8. Remove the trim covers.
9. Remove the guide holders.
10. Remove the reclining devices.
• Remove the both reclining device fixing bolts
from the sides of the seat cushions.
11. Remove the rear seat legs (left and right).
• Remove the rear cushion dampers and spiral
springs, after removing the push nuts.
12. Remove the support covers (left and right).
• Remove the three screws from each support
cover.
13. Remove the seat lock covers (left and right).
14. Remove the seat lock assemblies and the rear seat
belt buckle assemblies (left and right).
• Remove the fixing bolts.
15. Remove the free hinge cover.
Installation
To install, follow the removal steps in the reverse order,
noting the following points:
1. Tighten the seat lock assemblies and the rear seat
belt buckle assemblies to the specified torque.
Torque: 39 N·m (29 lb ft)
2. Tighten the reclining devices to the specified torque.
Torque: 46 N·m (34 lb ft)
3. Tighten the rear seat assembly fixing bolts to the
specified torque.
Torque: 39 N·m (29 lb ft)
8G–14
SEATS
Main Data and Specifications
Torque Specifications
750R200020
SEATS
8G–15
755R200015
SECURITY AND LOCKS
8H–1
RODEO
BODY AND ACCESSORIES
CONTENTS
SECURITY AND LOCKS
Service Precaution. . . . . . . . . . . . . . . . . . . . .
8H–1
Front Door Lock Assembly . . . . . . . . . . . . . .
8H–2
Front Door Lock Assembly and
Associated Parts . . . . . . . . . . . . . . . . . . . . .
8H–2
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . .
8H–3
Installation . . . . . . . . . . . . . . . . . . . . . . . . .
8H–4
Front Outside Handle. . . . . . . . . . . . . . . . . . .
8H–5
Front Outside Handle and Associated Parts
8H–5
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . .
8H–5
Installation . . . . . . . . . . . . . . . . . . . . . . . . .
8H–5
Rear Door Lock Assembly . . . . . . . . . . . . . . .
8H–6
Rear Door Lock Assembly and
Associated Parts . . . . . . . . . . . . . . . . . . . . .
8H–6
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . .
8H–6
Installation . . . . . . . . . . . . . . . . . . . . . . . . .
8H–7
Rear Outside Handle . . . . . . . . . . . . . . . . . . .
8H–8
Rear Outside Handle and Associated Parts
8H–8
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . .
8H–8
Installation . . . . . . . . . . . . . . . . . . . . . . . . .
8H–8
Tailgate Lock and Hatchgate Lock (LWB) . . .
8H–9
Tailgate Lock, Hatchgate Lock and
Associated Parts . . . . . . . . . . . . . . . . . . . . .
8H–9
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . .
8H–9
Installation . . . . . . . . . . . . . . . . . . . . . . . . .
8H–10
Tailgate Lock (SWB) . . . . . . . . . . . . . . . . . . .
8H–11
Tailgate Lock and Associated Parts . . . . . .
8H–11
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . .
8H–11
Installation. . . . . . . . . . . . . . . . . . . . . . . . . .
8H–12
Key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8H–13
Key Coding . . . . . . . . . . . . . . . . . . . . . . . . .
8H–13
Key Styles . . . . . . . . . . . . . . . . . . . . . . . . . .
8H–13
Power Door Lock System . . . . . . . . . . . . . . .
8H–14
General Description . . . . . . . . . . . . . . . . . .
8H–14
Door Lock Key Switch. . . . . . . . . . . . . . . . .
8H–14
Front Door Lock Actuator . . . . . . . . . . . . . .
8H–14
Rear Door Lock Actuator . . . . . . . . . . . . . .
8H–14
Tailgate Lock Actuator . . . . . . . . . . . . . . . .
8H–14
Anti-Theft System . . . . . . . . . . . . . . . . . . . . .
8H–14
General Description . . . . . . . . . . . . . . . . . .
8H–14
Anti–Theft & Keyless Entry Controller . . . .
8H–14
Anti–Theft Indicator. . . . . . . . . . . . . . . . . . .
8H–15
Anti–Theft Horn. . . . . . . . . . . . . . . . . . . . . .
8H–15
Engine Hood Switch . . . . . . . . . . . . . . . . . .
8H–16
Anti–theft & Keyless Entry Control
Unit/Transmitter Replacement . . . . . . . . . .
8H–16
Keyless Entry System . . . . . . . . . . . . . . . . . .
8H–17
ID Code Registration . . . . . . . . . . . . . . . . .
8H–17
Main Data and Specifications . . . . . . . . . . . .
8H–21
Service Precaution
WARNING: THIS VEHICLE HAS A SUPPLEMENTAL
RESTRAINT SYSTEM (SRS). REFER TO THE SRS
COMPONENT AND WIRING LOCATION VIEW IN
ORDER TO DETERMINE WHETHER YOU ARE
PERFORMING SERVICE ON OR NEAR THE SRS
COMPONENTS OR THE SRS WIRING. WHEN YOU
ARE PERFORMING SERVICE ON OR NEAR THE
SRS COMPONENTS OR THE SRS WIRING, REFER
TO THE SRS SERVICE INFORMATION. FAILURE TO
FOLLOW WARNINGS COULD RESULT IN POSSIBLE
AIR BAG DEPLOYMENT, PERSONAL INJURY, OR
OTHERWISE UNNEEDED SRS SYSTEM REPAIRS.
CAUTION: Always use the correct fastener in the
proper location. When you replace a fastener, use
ONLY the exact part number for that application.
ISUZU will call out those fasteners that require a
replacement after removal. ISUZU will also call out
the fasteners that require thread lockers or thread
sealant. UNLESS OTHERWISE SPECIFIED, do not
use supplemental coatings (Paints, greases, or
other corrosion inhibitors) on threaded fasteners or
fasteners joint interfaces. Generally, such coatings
adversely affect the fastener torque and the joint
clamping force, and may damage the fasteners.
When you install fasteners, use the correct
tightening sequence and specifications. Following
these instructions can help you avoid damage to
parts and systems.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст