Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Manual — part 1109
FRONT SUSPENSION
3C–23
Main Data and Specifications
General Specifications
Front suspension
Type
Independent wishbone arms, torsion bar spring with stabilizer
bar.
Torsion bar spring
Length
1142 mm (45.0in)
Diameter
27.0 mm (1.06 in)
Front shock absorber
Type
Hydraulic, double acting, telescopic
Piston diameter
30.0 mm (1.18 in)
Stroke
Without ISC
shock
absorber
125.0 mm
(4.92 in)
With ISC
shock
absorber
120.0mm
(4.72in)
Compressed
length
255.0 mm
(10.04in)
261.0mm
(10.28 in)
Extended length
380.0 mm
(14.96in)
381.0mm
(15.0in)
Stabilizer bar
Diameter
25.0 mm (0.98 in)
3C–24
FRONT SUSPENSION
Torque Specifications
E03R200005
FRONT SUSPENSION
3C–25
Special Tools
ILLUSTRATION
TOOL NO.
TOOL NAME
J–8092
Grip
J–45647
Installer; Oil seal
J–39376
Installer; Upper arm
bushing
J–29775
Remover and Installer
Upper arm bushing
J–36833
Remover and Installer kit;
Lower arm front bushing
J–36834
Remover and Installer kit;
Lower arm rear bushing
J–36831
Ball joint remover
J–29107
Tie-rod end remover
ILLUSTRATION
TOOL NO.
TOOL NAME
REAR SUSPENSION
3D–1
RODEO
SUSPENSION
CONTENTS
REAR SUSPENSION
Service Precaution. . . . . . . . . . . . . . . . . . . . .
3D–1
General Description . . . . . . . . . . . . . . . . . .
3D–1
Diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . .
3D–2
Coil Spring . . . . . . . . . . . . . . . . . . . . . . . . . . .
3D–5
Coil Spring and Associated Parts . . . . . . . .
3D–5
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . .
3D–5
Inspection and Repair. . . . . . . . . . . . . . . . .
3D–6
Installation . . . . . . . . . . . . . . . . . . . . . . . . .
3D–6
Shock Absorber . . . . . . . . . . . . . . . . . . . . . . .
3D–7
Shock Absorber and Associated Parts . . . .
3D–7
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . .
3D–7
Inspection and Repair. . . . . . . . . . . . . . . . .
3D–7
Installation . . . . . . . . . . . . . . . . . . . . . . . . .
3D–7
Trailing Link . . . . . . . . . . . . . . . . . . . . . . . . . .
3D–8
Trailing Link and Associated Parts . . . . . . .
3D–8
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . .
3D–8
Inspection and Repair. . . . . . . . . . . . . . . . .
3D–8
Installation . . . . . . . . . . . . . . . . . . . . . . . . .
3D–9
Upper Link . . . . . . . . . . . . . . . . . . . . . . . . . . .
3D–10
Upper Link and Associated Parts . . . . . . . .
3D–10
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . .
3D–10
Inspection and Repair. . . . . . . . . . . . . . . . .
3D–10
Installation. . . . . . . . . . . . . . . . . . . . . . . . . .
3D–11
Lateral Rod . . . . . . . . . . . . . . . . . . . . . . . . . .
3D–12
Lateral Rod and Associated Parts . . . . . . .
3D–12
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . .
3D–12
Inspection and Repair. . . . . . . . . . . . . . . . .
3D–12
Installation. . . . . . . . . . . . . . . . . . . . . . . . . .
3D–13
Stabilizer Bar . . . . . . . . . . . . . . . . . . . . . . . . .
3D–14
Stabilizer Bar and Associated Parts . . . . . .
3D–14
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . .
3D–14
Inspection and Repair. . . . . . . . . . . . . . . . .
3D–14
Installation. . . . . . . . . . . . . . . . . . . . . . . . . .
3D–15
Main Data and Specifications . . . . . . . . . . . .
3D–16
Special Tools . . . . . . . . . . . . . . . . . . . . . . . . .
3D–18
Service Precaution
WARNING: THIS VEHICLE HAS A SUPPLEMENTAL
RESTRAINT SYSTEM (SRS). REFER TO THE
SRS
COMPONENT AND WIRING LOCATION VIEW IN
ORDER TO DETERMINE WHETHER YOU ARE
PERFORMING SERVICE ON OR NEAR THE SRS
COMPONENTS OR THE SRS WIRING. WHEN YOU
ARE PERFORMING SERVICE ON OR NEAR THE
SRS COMPONENTS OR THE SRS WIRING, REFER
TO THE
SRS SERVICE INFORMATION. FAILURE TO
FOLLOW WARNINGS COULD RESULT IN POSSIBLE
AIR BAG DEPLOYMENT, PERSONAL INJURY, OR
OTHERWISE UNNEEDED SRS SYSTEM REPAIRS.
CAUTION: Always use the correct fastener in the
proper location. When you replace a fastener, use
ONLY the exact part number for that application.
ISUZU will call out those fasteners that require a
replacement after removal. ISUZU will also call out
the fasteners that require thread lockers or thread
sealant. UNLESS OTHERWISE SPECIFIED, do not
use supplemental coatings (Paints, greases, or
other corrosion inhibitors) on threaded fasteners or
fastener joint interfaces. Generally, such coatings
adversely affect the fastener torque and the joint
clamping force, and may damage the fastener.
When you install fasteners, use the correct
tightening sequence and specifications. Following
these instructions can help you avoid damage to
parts and systems.
General Description
The rear suspension is a 5-link, coil spring type
suspension with a stabilizer bar, consisting of two
trailing links, two upper links, lateral rod, shock
absorber, and stabilizer. In this suspension, the links
are specially arranged to enable the rear axle to move
freely, thereby expanding suspension stroke, reducing
friction, and improving lateral rigidity and roll control. All
these result in improved stability, riding comfort, and
rough road maneuverability.
Each link connects the axle housing with the frame
through a runner bushing. The axle housing is
supported by the trailing links and upper links
longitudinally and by the lateral rod latitudinally.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст