Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Manual — part 945
MANUAL TRANSMISSION
7B–15
220RY002
Legend
(1) Release Bearing and Shift Fork
(2) Clutch Housing
(3) Front Cover
(4) Snap Ring
(5) Snap Ring
(6) 1st and 2nd Switch
(7) Drain Plug
(8) Backup Light Switch
(9) Plug
(10) Transmission Case
(11) Filler Plug
(12) Oil Receiver Pipe
(13) Reverse Restrict Pin
(14) Gear Control Rod
(15) Transfer Adapter
(16) Plug
(17) Gear Control Box
(18) Shift Lever Housing
(19) Oil Seal
(20) Plug
7B–16 MANUAL TRANSMISSION
Disassembly
1. Remove the drain plag and filler plug.
1. Remove the drain plug (1) and gasket.
2. Remove the filler plug (2) and gasket.
220RW007
2. Remove the clutch release bearing and shift fork.
1. Remove the clutch release bearing (3) from the
front cover.
2. Remove the split pin (4). Remove the shaft from
the under. Remove the shift fork (5).
220RW086
3. Remove the switch.
1. Remove backup light switch (6) and gasket.
2. Remove 1st and 2nd switch (8) and gasket.
220RY001
4. Remove the clutch housing.
1. Remove the 9 bolts.
241RW001
MANUAL TRANSMISSION
7B–17
2. Using a plastic hammer, carefully tap the clutch
housing.
220RW008
5. Remove gear control box and gasket.
1. Remove the 6 bolts, gear control box and gasket.
230RW001
6. Remove transfer adapter.
1. Using a hexagon wrench, remove the plug (1).
220RW010
2. Using a pin punch and hammer, drive out the
slotted spring pin (2).
230RW002
7B–18 MANUAL TRANSMISSION
3. Using the M8
×
1.25 bolt, remove the gear control
rod and the shift lever housing.
NOTE: Turn the M8 bolt a few times, before remove the
gear control rod.
220RW098
4. Remove the 10 bolts and clamp.
220RW016
5. Using a plastic hammer, tap the transfer adapter.
NOTE:
D
Be careful not to lose the pin.
D
Cover the mainshaft splines with adhesive tape.
This will prevent damage to the oil seal lip.
220RW015
7. Disassemble the transfer adapter assembly.
1. Using a torx socket wrench(T40), remove the
plug.
220RW013
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст