Isuzu Trooper (1998-2002 year). Manual — part 1036
8F–72
BODY STRUCTURE
Front Door Seal Finisher
Parts Location
635RS002
Legend
(1) Front Door Sill Plate
(2) Front Door Seal Finisher
Removal
1. Disconnect the battery ground cable.
2. Remove front door sill plate.
3. Remove front door seal finisher (1).
D
Pull the finisher out from the body panel.
635RS003
Installation
To install, follow the removal steps in the reverse order,
noting the following points.
1. Insert the finisher into the A corner and install the
finisher (2) in the arrow–marked directions.
2. Take care not to allow the sill plate (1) to distort or twist
the finisher.
635RS002
8F–73
BODY STRUCTURE
Rear Door Seal Finisher
Parts Location
655RS002
Legend
(1) Rear Door Sill Plate and Luggage Side Lower
Cover
(2) Rear Door Seal Finisher
Removal
1. Disconnect the battery ground cable.
2. Remove rear door sill plate and the luggage side
lower cover.
3. Remove rear door seal finisher (1).
D
Pull the rear door seal finisher (1) out from the body
panel.
635RS003
Installation
To install, follow the removal steps in the reverse order,
noting the following points.
1. Insert the rear door seal finisher (2) into the A corner
and install the finisher in the arrow-marked directions.
2. Be careful not to allow the sill plate and cover (1) to
distort or twist the finisher.
655RS002
8F–74
BODY STRUCTURE
Tailgate Assembly (LH)
Parts Location
681RW008
Legend
(1) Tailgate Fixing Bolt
(2) Tailgate Hinge
(3) Tailgate Harness Connection
(4) Tailgate Stopper Assembly
(5) Tailgate Trim Panel (LH)
(6) Tailgate Assembly (LH)
Removal
1. Disconnect the battery ground cable.
2. Remove tailgate time panel (LH).
D
Refer to Tailgate Trim Panel (LH) in Exterior /
Interior Trim section.
3. Remove tailgate stopper assembly
4. Remove tailgate harness connection.
D
Open the luggage trim panel lid and disconnect the
tailgate harness connection.
810RS003
8F–75
BODY STRUCTURE
5. Remove tailgate fixing bolts.
681RS002
6. Remove tailgate assembly (LH).
7. Remove tailgate hinge.
D
Apply a setting mark (1) on the body side hinge and
remove the hinge fixing bolts.
681RW007
Installation
To install, follow the removal steps in the reverse order,
noting the following points.
1. Apply chassis grease to the tailgate hinge and the
tailgate stopper moving surface.
2. Align the tailgate fitting to the body by referring to
Body Dimension in this section.
3. Tighten the hinge bolts to the specified torque.
Torque : 34 N
•
m (3.5kg·m/25 lb ft)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст