Isuzu Trooper (1998-2002 year). Manual — part 751
AUTOMATIC TRANSMISSION (AW30-40LE)
7A–201
240RY00015
240RY00029
240RY00010
240RY00016
3. Check valve, spring
Install new check valve and spring.
mm (in.)
Piston
Outer diameter
Height
B–2
36.8 (1.449)
62.5 (2.461)
C–2
36.8 (1.449)
56.6 (2.228)
B–0
31.8 (1.252)
52.0 (2.047)
C–0
29.8 (1.173)
44.0 (1.732)
Spring
Free length
Outer diameter
(1) B–2
75.8 (2.984)
20.1 (0.791)
(2) C–2 (Inner)
42.1 (1.658)
14.7 (0.579)
(3) C–2 (Outer)
64.0 (2.520)
20.2 (0.795)
(4) B–0
63.6 (2.504)
16.0 (0.630)
(5) C–0(Outer)
74.6 (2.937)
20.9 (0.823)
(6) C–0(Inner)
46.0 (1.811)
14.0 (0.551)
7A–202
AUTOMATIC TRANSMISSION (AW30-40LE)
240RY00017
244RY00017
249RY00011
249RY00012
4. Valve body
Align the groove of the manual valve to the pin of the lever.
Install the twenty bolts.
Each bolt length (mm) is indicated in the figure.
5. Solenoid wiring
Coat a new O–ring with ATF, and install it to the solenoid
wiring.
Insert the solenoid wiring to the case and install the stopper
plate.
Connect the connectors to the solenoid S1(1), S2(2), lock-
up solenoid (3), and pressure control solenoid (4).
N·m (kg·m/lb·in)
Torque
10 (1.0/87)
AUTOMATIC TRANSMISSION (AW30-40LE)
7A–203
244RY00002
244RY00003
240RY00019
240RY00020
6. Oil strainer assembly
Install a new oil strainer assembly with gaskets.
Install the oil strainer with the gaskets to the valve body.
Tighten the four bolts.
7. Oil pan
Install magnet in pan.
Remove any packing material and be careful not to drop oil
on the contacting surfaces of the transmission case and oil
pan.
Apply liquid gasket (TB1281 or its equivalent) to the oil pan
as shown in the figure.
NOTE:
Install the oil pan as soon as the seal packing is applied.
Install and tighten the nineteen bolts.
N·m (kg·m/lb·in)
Torque
10 (1.0/87)
N·m (kg·m/lb·in)
Torque
8 (0.8/69)
7A–204
AUTOMATIC TRANSMISSION (AW30-40LE)
REASSEMBLY OF MAJOR COMPONENTS (3)
240RY00030
Reassembly steps
1. Transmission assembly
▲
2. Converter housing
▲
3. Adapter housing
▲
4. Oil temperature sensor
▲
5. Elbow
▲
6. Neutral start switch
▲
7. Transmission control rod and shift lever
8. Input revolution sensor
9. Output revolution sensor
10. Breather hose
▲
11. Torque converter
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст