Isuzu Trooper (1998-2002 year). Manual — part 723
AUTOMATIC TRANSMISSION (AW30-40LE)
7A–89
INSTALLATION
To install, follow the removal steps in the reverse order,
noting the following points;
1. Torque
Engine-Transmission Bolt Torque
225RY00001
N·m(kg·m / lb·ft)
Rear mounting to crossmember
50 (5.1/37)
Torque converter bolt
29 (3.0/22)
ATF cooler pipe to transmission
44 (4.5/33)
Exhaust pipe flange to flange
43 (4.4/32)
3rd crossmember to flame
76 (7.8/56)
Front propeller shaft bolt
63 (6.4/46)
Rear propeller shaft bolt
63 (6.4/46)
7A–90
AUTOMATIC TRANSMISSION (AW30-40LE)
Transmission-Transfer Case Bolt Torque
260RY00001
AUTOMATIC TRANSMISSION (AW30-40LE)
7A–91
UNIT REPAIR
DISASSEMBLY OF MAJOR COMPONENTS (1)
240RY00024
NOTE:
Steps marked with a triangle (
▲
) are important
operations. Detailed information appears in the text.
Disassembly steps
1. Torque converter
2. Breather hose
▲
3. Transmission ocntrol rod and shift lever
▲
4. Neutral start switch
▲
5. Elbow
6. Oil temperature sensor
7. Input revolution sensor
8. Output revolution sensor
9. Adapter housing
10. Transmission assembly
7A–92
AUTOMATIC TRANSMISSION (AW30-40LE)
249RW003
240RY00001
240RY00002
Important operations
3. Transmission control rod and shift lever
Remove the transmission control rod and shift lever.
4. Neutral start switch
Unstake the lock washer.
Remove the nut and bolts, and then remove the neutral start
switch.
Remove the lock washer and grommet.
5. Elbow
Remove two elbows from transmission case.
Install special tool to the transmission unit.
Holding fixture: 5-8840-2152-0 (J-37227)
Fixture base: 5-8840-0003-0 (J-3289-20)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст