Nissan Almera Tino V10. Manual — part 897
Service Data and Specifications (SDS)
OIL PRESSURE CHECK
=NLLC0011
Engine speed
rpm
Approximate discharge pressure
kPa (bar, kg/cm
2
, psi)
600
More than 98 (0.98, 1.0, 14)
2,000
More than 294 (2.94, 3.0, 43)
6,000
More than 392 (3.92, 4.0, 57)
OIL PUMP INSPECTION
NLLC0013
Unit: mm (in)
Body to outer rotor radial clearance
0.250 - 0.325 (0.0098 - 0.0128)
Inner rotor to outer rotor tip clearance
Below 0.18 (0.0071)
Body to inner rotor clearance
0.030 - 0.085 (0.0012 - 0.0033)
Body to outer rotor axial clearance
0.030 - 0.090 (0.0012 - 0.0035)
Inner rotor to brazed portion of housing clearance
0.045 - 0.091 (0.0018 - 0.0036)
REGULATOR VALVE INSPECTION
NLLC0012
Unit: mm (in)
Regulator valve to oil pump cover clearance
0.052 - 0.088 (0.0020 - 0.0035)
OIL CAPACITY
NLLC0036
Unit:
(Imp qt)
With oil filter change
2.
7
(2-
3
/
8
)
Without oil filter change
2.
5
(2-
1
/
4
)
Dry engine (engine overhaul)
3.
1
(2-
3
/
4
)
ENGINE LUBRICATION SYSTEM
QG
Service Data and Specifications (SDS)
LC-10
SEM164F
AEM080
Precautions
LIQUID GASKET APPLICATION PROCEDURE
NLLC0014
1.
Use a scraper to remove all traces of old liquid gasket from
mating surfaces and grooves. Also, completely clean any oil
from these areas.
2.
Apply a continuous bead of liquid gasket to mating surfaces.
(Use Genuine Liquid Gasket or equivalent).
I
For oil pan, be sure liquid gasket diameter is 3.5 to 4.5 mm
(0.138 to 0.177 in).
I
For areas except oil pan, be sure liquid gasket diameter is 2.0
to 3.0 mm (0.079 to 0.118 in).
3.
Apply liquid gasket around the inner side of bolt holes (unless
otherwise specified).
4.
Assembly should be done within 5 minutes after coating.
5.
Wait at least 30 minutes before refilling engine oil and engine
coolant.
Preparation
SPECIAL SERVICE TOOLS
NLLC0015
Tool number
Tool name
Description
EG17650301
Radiator cap tester
adapter
NT564
Adapting radiator cap tester to radiator filler neck
a: 28 (1.10) dia.
b: 31.4 (1.236) dia.
c: 41.3 (1.626) dia.
Unit: mm (in)
GI
MA
EM
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
ENGINE COOLING SYSTEM
QG
Precautions
LC-11
Cooling Circuit
NLLC0016
SLC317B
System Check
NLLC0017
WARNING:
Never remove the radiator cap when the engine is hot. Serious
burns could occur from high pressure fluid escaping from the
radiator.
Wrap a thick cloth around the cap. Slowly turn it a quarter turn
to allow built-up pressure to escape. Carefully remove the cap
by turning it all the way.
CHECKING COOLING SYSTEM HOSES
NLLC0017S01
Check hoses for the following:
I
Improper attachment
I
Leaks
I
Cracks
I
Damage
I
Loose connections
I
Chafing
I
Deterioration
ENGINE COOLING SYSTEM
QG
Cooling Circuit
LC-12
CHECKING RADIATOR
NLLC0017S04
Check radiator for mud or clogging. If necessary, clean radiator as
follows.
I
Be careful not to bend or damage the radiator fins.
I
When radiator is cleaned without removal, remove all sur-
rounding parts such as cooling fan, radiator shroud and horns.
Then tape the harness and connectors to prevent water from
entering.
1.
Apply water by hose to the back side of the radiator core ver-
tically download.
2.
Apply water again to all radiator core surfaces once per
minute.
3.
Stop washing if any stains no longer flow out from the radia-
tor.
4.
Blow air into the back side of radiator core vertically download.
I
Use compressed air lower than 490 kPa (4.9 bar, 5 kg/cm
2
,
71 psi) and keep distance more than 30 cm (11.8 in).
5.
Blow air again into all the radiator core surfaces once per
minute until no water sprays out.
SLC613-A
CHECKING RADIATOR CAP
NLLC0017S03
To check radiator cap, apply pressure to cap with a tester.
Radiator cap relief pressure:
Standard
78 - 98 kPa
(0.78 - 0.98 bar, 0.8 - 1.0 kg/cm
2
, 11 - 14 psi)
Limit
59 kPa (0.59 bar, 0.6 kg/cm
2
, 9 psi)
SMA967B
Pull the negative pressure valve to open it.
Check that it closes completely when released.
SLC756AA
CHECKING COOLING SYSTEM FOR LEAKS
NLLC0017S02
To check for leakage, apply pressure to the cooling system with a
tester.
Testing pressure:
157 kPa (1.57 bar, 1.6 kg/cm
2
, 23 psi)
CAUTION:
Higher pressure than specified may cause radiator damage.
GI
MA
EM
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
ENGINE COOLING SYSTEM
QG
System Check (Cont’d)
LC-13
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст