Nissan Almera Tino V10. Manual — part 729
Location of Antenna
NLEL0468
YEL351E
YEL826D
Antenna Rod Replacement
NLEL0469
REMOVAL
NLEL0469S01
Models with the fixing nut
NLEL0469S0101
1.
Remove front portion of head lining.
2.
Remove antenna base cover.
3.
Remove antenna base fixing nut and antenna base.
AUDIO ANTENNA
Location of Antenna
EL-212
System Description
NLEL0545
MULTIFUNCTION SWITCH SYSTEM
NLEL0545S01
Refer to Owner
′
s Manual for multifunction switch operating instruc-
tions.
Using the multifunction switch at the center of the instrument panel,
the controls of the following systems are centralized:
I
Auto A/C system
I
Vehicle information system
I
Audio system
PRECAUTION OF LCD MONITOR
NLEL0545S02
I
When passenger compartment temperature is low, the LCD
monitor sometimes dims because of the brightness of the back
light (small fluorescent light) integrated into the LCD monitor
decrease. In this case, the refreshing rate of the picture also
becomes low because of the low response of the LCD moni-
tor. When passenger compartment becomes warm, however,
the LCD recovers the normal display.
I
Sometimes, black or bright dots peculiar to LCD monitor can
be seen on the display.
I
Back light sometimes flickers or darkens according to the total
consumption hours and the number of ON and OFF switching.
In this case, the back light should be replaced (display unit
assembly).
POWER SUPPLY AND GROUND
NLEL0545S03
Power is Supplied at All Times
NLEL0545S0301
I
through 15A fuse (No. 40, located in fuse and fusible link box)
I
to display unit terminals 2 and 4
I
to audio unit terminals 3 and 4.
When Ignition Switch is in ACC or ON Position, Power
is Supplied
NLEL0545S0302
I
through 10A fuse [No. 1, located in fuse block (J/B)]
I
to display unit terminal 6,
I
to multifunction switch terminal 6 and
I
to audio unit terminal 2.
When Ignition Switch is in ON or START Position,
Power is Supplied
NLEL0545S0303
I
through 10A fuse [No. 10, located in fuse block (J/B)]
I
to display unit terminal 5.
Ground is Supplied
NLEL0545S0304
I
to multifunction switch terminal 1 and
I
to display unit terminals 1 and 3
I
through body grounds M28, M48 and M109 (QG engine mod-
els) or F51 (YD engine models).
AV COMMUNICATION LINE
NLEL0545S04
Display unit is controlled by the following unit with AV communica-
tion line.
I
Multifunction switch
I
Audio unit
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
HA
SC
IDX
LCD (LIQUID CRYSTAL DISPLAY)
System Description
EL-213
VEHICLE INFORMATION SYSTEM
NLEL0545S05
Refer to Owner
′
s Manual for vehicle information system operating
instructions.
Vehicle information system is monitoring to drive information, fuel
economy information and maintenance information.
YEL827D
1.
Press “INFO” switch to display vehicle information display.
2.
Select “Drive”, “Fuel Economy” or “Maintenance”.
Display items
Display/Setting contents
Drive
Elapsed Time
Displays driving time with a range of 0000:00:00 to 9999:59:59.
Driving Distance (km)
Displays driving distance with a range of 00000.0 to 99999.9.
Average Speed
(km/h)
Displays average speed with a range of 000.0 to 999.9.
Fuel Economy
Average Fuel
Economy (
/100 km)
Displays fuel economy with ignition switch ON, average fuel
economy each 30 minutes.
Distance to Empty
(km)
Displays possible driving distance with remaining fuel.
Fuel Economy (
/100
km)
Displays fuel economy each approx. 100 ms.
Fuel Economy
Record (
/100 km)
Displays Average Fuel Consumption History.
Maintenance
(with Maintenance Information*)
Engine Oil
Maintenance intervals of engine oil and setting of oil change cycle
Oil Filter
Maintenance intervals of oil filter and setting of filter replacement
cycle
Custom 1
Determines when maintenance intervals are needed.
Custom 2
Determines when maintenance intervals are needed.
*: Maintenance information displays the change cycle of engine oil, oil filter, custom 1 and custom 2 on LCD monitor depending on the
driving distance specified by a driver or a technician.
LCD (LIQUID CRYSTAL DISPLAY)
System Description (Cont’d)
EL-214
MKIB0144E
Drive Information
NLEL0545S0501
1.
Select “Drive”.
2.
Elapsed time, driving distance and average speed are dis-
played as drive information. When pushing “ENTER”, elapsed
time, driving distance and average speed are all reset.
MKIB0145E
Fuel Economy Information
NLEL0545S0502
1.
Select “Fuel Economy”.
2.
Average Fuel Economy, Distance to Empty, Fuel Economy are
displayed as Fuel Economy information.
SKIA0772E
3.
Select “Fuel Economy Record”. The average fuel consumption
history will be displayed in graph along with the average for the
previous Reset – to – Reset period.
MKIB0146E
Maintenance Information
NLEL0545S0503
1.
Select “Maintenance”.
2.
Engine Oil, Oil Filter, Custom 1 and Custom 2 are displayed as
maintenance information.
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
HA
SC
IDX
LCD (LIQUID CRYSTAL DISPLAY)
System Description (Cont’d)
EL-215
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст