Nissan Almera Tino V10. Manual — part 715
RHD MODELS
NLEL0462S02
YEL972D
CLOCK
Wiring Diagram — CLOCK — (Cont’d)
EL-156
System Description
NLEL0534
I
The rearview monitor is equipped to check the rearward of the vehicle with display when the selector lever
is in R position.
I
The lines of vehicle sides and the distance from the rear end of the vehicle are provided on display as a
guide. It allows the driver to know the distance between the vehicle and a rearward object, and the width
of the vehicle much easier.
POWER SUPPLY AND GROUND
NLEL0534S01
Power is supplied at all time
I
through 15A fuse (No. 40, located in fuse and fusible link box)
I
to rearview camera control unit terminal 7.
When ignition switch is ACC or ON position, power is supplied
I
through 10A fuse [No. 1, located in fuse block (J/B)]
I
to rearview camera control unit terminal 6.
When ignition switch is ON or START position, power is supplied
I
through 10A fuse [No. 30, located in fuse block (J/B)]
I
to back−up lamp switch terminal 1 (M/T models) or
I
to park/neutral position switch terminal 3 (A/T model).
Ground is supplied
LHD models
I
to rearview camera control unit terminal 16 and
I
to rearview camera terminal 3
I
through body ground B24, B30, and D89
RHD models
I
to rearview camera control unit terminal 16
I
through body ground M28, M48, M109 (QG engine) or F51 (YD engine)
I
to rearview camera terminal 3
I
through body ground D89 and B49.
REARVIEW CAMERA OPERATION
NLEL0534S02
When A/T selector lever or gear position is reverse position
I
through back-up lamp switch terminal 2 in (QG and YD22DDTi engines) or
I
through park/neutral position switch terminal 3 (YD22DDT engine)
I
through park/neutral position switch terminal 8 (A/T model)
I
to rearview camera control unit terminal 14, and
I
to AV and NAVI control unit terminal 32 (with navigation system) or
I
to display unit terminal 7 (without navigation system).
Then, camera ON signal is sent
I
through rearview camera control unit terminal 5
I
to rearview camera terminal 4.
An image taken by rearview camera is sent
I
through rearview camera terminal 2
I
to rearview camera control unit terminal 3.
Then an image is sent
I
through rearview camera control unit terminal 2 and 13
I
to display terminal 9 and 10 (with navigation system) or
I
to display unit terminal 23 and 24 (without navigation system).
An image of rearview will be projected on the display.
Rearview Camera Guide Line (With Navigation System)
NLEL0534S0201
I
from AV and NAVI control unit terminal 37
I
to rearview camera control unit terminal 15.
Rearview guideline will be projected on the display.
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
HA
SC
IDX
REARVIEW MONITOR
System Description
EL-157
Component Parts and Harness Connector
Location
NLEL0538
YEL572E
REARVIEW MONITOR
Component Parts and Harness Connector Location
EL-158
Schematic
NLEL0539
YEL036E
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
HA
SC
IDX
REARVIEW MONITOR
Schematic
EL-159
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст