Nissan Almera Tino V10. Manual — part 786
6
COMMUNICATION SIGNAL INSPECTION
1. Connect audio unit to AV and NAVI control unit connector.
2. Check voltage signal between AV and NAVI control unit terminals 47 (R), 48 (G) and ground.
YEL397E
47 (R), 48 (G)-ground:
EL-400, “Terminals and Reference Value for AV and NAVI Control Unit”
OK or NG
OK
©
Replace audio unit.
NG
©
Replace AV and NAVI control unit.
NAVIGATION SYSTEM
Trouble Diagnoses (Cont’d)
EL-440
AIR CONDITIONING CONTROLS (ONLY) ARE
INEFFECTIVE (REAR DEFOGGER CONTROL
EXCLUDED)
NLEL0687S14
1
HARNESS CHECK
1. Turn the ignition switch OFF.
2. Disconnect A/C auto amp. connector and AV and NAVI control unit connector.
3. Check continuity between A/C auto amp. and AV and NAVI control unit.
YEL398E
MTBL1748
4. Check continuity between AV and NAVI control unit and ground.
MTBL1749
OK or NG
OK
©
GO TO 2.
NG
©
I
Check harness between A/C auto amp. and AV and NAVI control unit.
I
Check connector housings for disconnected or loose terminals.
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
HA
SC
IDX
NAVIGATION SYSTEM
Trouble Diagnoses (Cont’d)
EL-441
2
A/C-AV, AV-AC, AC-CLK COMMUNICATION SIGNAL CHECK
1. Connect A/C AUTO AMP. connector.
2. Turn the ignition switch ON.
3. Check voltage between AV and NAVI control unit and ground.
YEL399E
MTBL1750
OK or NG
OK
©
GO TO 3.
NG
©
I
Replace harness.
I
Replace A/C AUTO AMP.
NAVIGATION SYSTEM
Trouble Diagnoses (Cont’d)
EL-442
3
A/C-AV, AV-AC, AC-CLK COMMUNICATION SIGNAL CHECK
1. Connect AV and NAVI control unit connector.
2. Turn the ignition switch ON.
3. Check voltage signal between AV and NAVI control unit terminals 43, 44, 45 and ground.
YEL400E
MTBL1751
OK or NG
OK
©
Replace A/C auto amplifier.
NG
©
Replace AV and NAVI control unit.
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
HA
SC
IDX
NAVIGATION SYSTEM
Trouble Diagnoses (Cont’d)
EL-443
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст