Nissan Almera Tino V10. Manual — part 957
WORK FLOW
=NLRS0044S03
NOTE:
Seat belt pre-tensioner malfunction is indicated by “AIR BAG” warning lamp.
SRS799
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
How to Perform Trouble Diagnoses for Quick and Accurate Repair (Cont’d)
RS-40
Wiring Diagram — SRS —
NLRS0061
YRS103A
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
BT
HA
SC
EL
IDX
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
Wiring Diagram — SRS —
RS-41
MODELS WITH FRONT SEAT BELT PRE-TENSIONER B21, B27
NLRS0061S01
YRS104A
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
Wiring Diagram — SRS — (Cont’d)
RS-42
SRS800
SRS Operation Check
NLRS0047
DIAGNOSTIC PROCEDURE 1
NLRS0047S01
Checking Air Bag Operation by Using “AIR BAG”
Warning Lamp — User Mode
NLRS0047S0101
1.
After turning ignition switch from “OFF” to “ON”, “AIR BAG”
warning lamp operates.
2.
Compare “AIR BAG” warning lamp operation to the chart
below.
“AIR BAG” warning lamp operation — User mode —
SRS condition
Reference item
MRS095A
No malfunction is
detected. No further action
is necessary.
—
MRS096A
The system is malfunction-
ing and needs to be
repaired as indicated.
Go to DIAGNOSTIC PRO-
CEDURE 2 or 6 (RS-44 or
RS-53).
MRS097A
Air bag or/and seat belt
pre-tensioner is deployed.
Go to COLLISION DIAG-
NOSIS (RS-64).
Air bag fuse, diagnosis
sensor unit or harness is
malfunctioning and needs
to be repaired.
Go to DIAGNOSTIC PRO-
CEDURE 9 (RS-61).
MRS098A
One of the following has
occurred and needs to be
repaired.
I
Meter fuse is blown.
I
“AIR BAG” warning
lamp circuit has open or
short.
I
Diagnosis sensor unit is
malfunctioning.
Go to DIAGNOSTIC PRO-
CEDURE 10 (RS-63).
NOTE:
If “AIR BAG” warning lamp operates differently from the
operations shown above, refer to “AIR BAG” warning lamp
operation — Diagnosis mode —, DIAGNOSTIC PROCEDURE 6
(step 4), RS-53.
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
BT
HA
SC
EL
IDX
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
SRS Operation Check
RS-43
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст