Nissan Almera Tino V10. Manual — part 962
“AIR BAG” warning lamp operation — User mode —
SRS condition
Reference item
MRS095A
No malfunction is
detected.
No further action is neces-
sary.
—
MRS096A
The system is malfunc-
tioning and needs to be
repaired as indicated.
Go to DIAGNOSTIC PRO-
CEDURE 6 (RS-53).
MRS097A
Air bag is deployed.
Seat belt pre-tensioner is
deployed.
Go to COLLISION DIAG-
NOSIS (RS-64).
Air bag fuse, diagnosis
sensor unit or harness is
malfunctioning and needs
to be repaired.
Go to DIAGNOSTIC PRO-
CEDURE 9 (RS-61).
MRS098A
One of the following has
occurred and needs to be
repaired.
I
Meter fuse is blown.
I
“AIR BAG” warning
lamp circuit has open or
short.
I
Diagnosis sensor unit is
malfunctioning.
Go to DIAGNOSTIC PRO-
CEDURE 10 (RS-63).
DIAGNOSTIC PROCEDURE 8 (CONTINUED FROM
DIAGNOSTIC PROCEDURE 6)
NLRS0049S03
Inspecting SRS malfunctioning record
1
CONSIDER POSSIBILITY OF NOT ERASING SELF-DIAGNOSTIC RESULT AFTER REPAIRING
Is it the first time for maintenance of SRS?
Yes or No
Yes
©
Go to DIAGNOSTIC PROCEDURE 5 (RS-49). (Further inspection cannot be performed
without CONSULT-II.)
No
©
Diagnosis results (previously stored in the memory) might not be erased after repair. Go
to DIAGNOSTIC PROCEDURE 7, step 5 (RS-58).
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
Trouble Diagnoses without CONSULT-II (Cont’d)
RS-60
Trouble Diagnoses: “AIR BAG” Warning Lamp
Does Not Turn Off
=NLRS0050
DIAGNOSTIC PROCEDURE 9
NLRS0050S01
1
SEE THE DEPLOYMENT OF AIR BAG MODULE
Is air bag module deployed?
Yes or No
Yes
©
Refer to COLLISION DIAGNOSIS (RS-64).
No
©
GO TO 2.
2
CHECK AIR BAG FUSE
Is SRS “Air Bag” fuse OK?
SRS835
OK or NG
OK
©
GO TO 4.
NG
©
GO TO 3.
3
CHECK AIR BAG FUSE AGAIN
Replace “AIR BAG” fuse and turn ignition switch ON.
Is “AIR BAG” fuse blown again?
Yes
©
Repair main harness.
No
©
INSPECTION END
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
BT
HA
SC
EL
IDX
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
Trouble Diagnoses: “AIR BAG” Warning Lamp Does Not Turn Off
RS-61
4
CHECK DIAGNOSIS SENSOR UNIT
Connect CONSULT-II and touch “START”.
I
Is “AIR BAG” displayed on CONSULT-II?
C2SSE01
Yes or No
Yes
©
GO TO 5.
No
©
Visually check the wiring harness connection of diagnosis sensor unit. If the harness
connection check result is OK, replace diagnosis sensor unit.
5
CHECK HARNESS CONNECTION
Is harness connection between warning lamp and diagnosis sensor unit OK?
OK or NG
OK
©
Replace diagnosis sensor unit.
NG
©
Connect “AIR BAG” warning lamp and diagnosis sensor unit connector properly. If “AIR
BAG” warning lamp still does not go off, replace harness.
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
Trouble Diagnoses: “AIR BAG” Warning Lamp Does Not Turn Off (Cont’d)
RS-62
Trouble Diagnoses: “AIR BAG” Warning Lamp
Does Not Turn On
=NLRS0051
DIAGNOSTIC PROCEDURE 10
NLRS0051S01
1
CHECK “METER” FUSE
Is meter fuse OK?
SRS836
OK or NG
OK
©
GO TO 3.
NG
©
GO TO 2.
2
CHECK “METER” FUSE AGAIN
Replace meter fuse and turn ignition switch ON.
Is meter fuse blown again?
Yes
©
Repair main harness.
No
©
INSPECTION END
3
CHECK “AIR BAG” WARNING LAMP LED
Is “AIR BAG” warning lamp LED OK?
OK or NG
OK
©
GO TO 4.
NG
©
Replace combination meter.
4
CHECK HARNESS CONNECTION BETWEEN DIAGNOSIS SENSOR UNIT AND “AIR BAG” WARNING
LAMP
Disconnect diagnosis sensor unit connector and turn ignition switch “ON”.
I
Does “AIR BAG” warning lamp turn on?
Yes or No
Yes
©
Replace diagnosis sensor unit.
No
©
Check the ground circuit of “AIR BAG” warning lamp.
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
BT
HA
SC
EL
IDX
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
Trouble Diagnoses: “AIR BAG” Warning Lamp Does Not Turn On
RS-63
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст