Nissan Murano Z51. Manual — part 384
DLK-44
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
AUTOMATIC BACK DOOR SYSTEM
AUTOMATIC BACK DOOR SYSTEM
System Diagram
INFOID:0000000005517459
System Description
INFOID:0000000005517460
The automatic back door system performs the automatic open/close operation of the back door by operating
the automatic back door switch, the automatic back door close switch, the back door opener switch, and Intel-
ligent Key.
AUTOMATIC BACK DOOR FUNCTIONS
JMKIA1859GB
AUTOMATIC BACK DOOR SYSTEM
DLK-45
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
OPERATION ENABLE CONDITION
*: If the registered Intelligent Key is used, the operation can be performed even if the back door is in the LOCK position
CONTROL IF NOT WITHIN THE OPERATION CONDITIONS DURING THE OPERATION
If the back door is not within the operation conditions during the operation, the automatic back door control unit
performs the control as follows.
Function
Description
Automatic back door open/close
function
In the case of the back door fully closed, operate the automatic back door switch, Intelligent Key
bottom or back door opener switch with the back door unlock. The back door closure motor re-
leases the latch, then the automatic back door motor opens the back door to the fully open po-
sition. Reverse the closure motor to the neutral position simultaneously.
In the case of the back door fully open, operate the automatic back door switch, Intelligent Key
bottom or back door close switch. The automatic back door motor closes the back door to the
half-latch position, then the back door closure motor closes to the full latch position. Then, re-
verse the closure motor to the neutral position.
NOTE:
When the main switch is OFF, the power operation is not available by back door opener switch
and automatic back door close switch.
Back door auto closure function
When the back door is closed to the half-latch position, the motor drives to rotate the latch lever
and pulls it in from half latched to fully latched and automatically closes the door. Then, reverse
the closure motor to the neutral position.
Anti-pinch function
During auto operation, if an object is detected by encoder pulse or touch sensor in the door's
path, a warning chime sounds and the back door operates in the reverse direction to prevent
pinching.
Intermittent clutch function
If the main switch is turned to OFF during auto operation, the back door may be closed suddenly
because the operation is interrupted immediately when the operation cannot be continued be-
cause of the detection of a system malfunction. Therefore, operate the clutch intermittently to
stabilize the back door behavior and ensure safety.
Warning function
The warning function as follows and are given to the user as warning information and warnings
using automatic back door buzzer and hazard.
Automatic back door switch
Intelligent Key
Automat-
ic back
door close
switch
Back door opener
switch
Operating direction
Fully closed
→
Open
Fully open
→
Closed
Fully
closed
→
Open
Fully open
→
Closed
Fully open
→
Closed
Fully closed
→
Open
Main switch
—
—
—
—
ON
ON
Ignition position
ON
ACC/
LOCK
—
Key is removed from
key slot.
—
ON
ACC/
LOCK
Shift selector lever
P position
—
—
—
—
—
P position
—
Vehicle speed
0 km/h
Back door lock condition
—
—
—
—
—
Unlock*
Touch sensor
Normal
Power supply
(Automatic power back
door control unit)
Approx. 11 V or more
Item
(Condition)
Back door condition
Main Switch (ON
→
OFF)
• Motor: OFF
• Clutch: OFF (Intermittent clutch function)
Key slot (OFF
→
ON)
The operation is continued
DLK-46
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
AUTOMATIC BACK DOOR SYSTEM
TIME CHART FOR AUTOMATIC POWER BACK DOOR SYSTEM
Fully Closed to Fully Open Operation
When operating the automatic back door switch, automatic back door opener switch and Intelligent Key in the
fully closed position, the system operates as follows.
Vehicle stop condition (open operation)
• IGN ON and shift P position
→
IGN ON and
other than P position
• IGN OFF and shift N position
→
IGN ON and
N position
The operation is continued
Operation condition release during the opera-
tion start announcement condition
Automatic back door function does not operate
Vehicle speed
(0 km/h
→
More than 0 km/h)
Open operation
Operation stop and intermittent clutch function [Back
door fully closed or buzzer sounds until the vehicle
stops (pattern C)]
Close operation
The operation is continued [buzzer sounds (pattern C)
until back door fully closed]
Touch sensor
(Normal
→
Open)
Open operation
Close operation: the operation is continued (If the
pinch is detected after that, the system switches to the
intermittent clutch function)
Close operation
Intermittent clutch function
Closure (close) opera-
tion
Closure (open) operation and buzzer sounds (pattern
B)
Closure [open (return
the latch to the neutral
position)]
The operation is continued
Operation time
(More than approx. 30 sec.)
Intermittent clutch function
Back door opener switch
(OFF
→
ON)
Open/close operation
The operation is continued
Closure (close) opera-
tion
Closure (open) operation and back door open
Closure [open (return
the latch to the neutral
position)]
Back door open
Malfunction detected
(IGN circuit, half latch switch and back door
state)
Intermittent clutch function
Item
(Condition)
Back door condition
AUTOMATIC BACK DOOR SYSTEM
DLK-47
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
1.
Operates the buzzer and hazard after the operation enable conditions are established
2.
The back door closure motor performs the open operation after the buzzer (pattern A) stops sounding
3.
Stops the back door closure motor open operation after turning the open switch to ON
Then, operate the automatic back door motor and clutch to perform the back door open operation
4.
The back door closure motor performs the close operation after turning the half latch switch to ON
5.
Stop the back door closure motor close operation and return the latch to the neutral position after turning
the close switch to OFF
NOTE:
In the operation of steps 3 and 4, the inputs of half latch switch, open switch, and close switch may be different
according to the reaction force of the back door weather-strip. Refer to the area encircled by a broken line in
the Time chart (Fully closed to fully open operation)
Fully Open to Fully Closed Operation
When operating the automatic back door switch, automatic back door close switch and Intelligent Key, the
automatic back door system operates as follows.
T1: 50 msec.
T2: 200 msec.
T3: 250 msec.
T4: 750 msec.
T5: 100 msec.
T6: 350 msec.
JMKIA1860GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст