Nissan Murano Z51. Manual — part 336
BODY ALIGNMENT
BRM-51
< SERVICE DATA AND SPECIFICATIONS (SDS)
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
Measurement Points
Unit: mm (in)
G - k
1770 (69.68)*
O - o
1540 (60.63)
S - J
1220 (48.03)*
V - X
1111 (43.74)*
H - h
1403 (55.24)
O - p
1741 (68.54)*
S - K
1044 (41.10)*
H - k
1626 (64.02)*
O - r
1620 (63.78)*
T - M
1237 (48.70)*
Point
Dimension
Memo
Point
Dimension
Memo
Point
Dimension
Memo
Point
Dimension
Memo
: Vehicle front
JSKIA0792ZZ
Point
Material
Point
Material
A
Cowl top extension installing hole center of cen-
ter positioning mark
φ
7 (0.28)
J, j, N, n
Inner center pillar joggle
B
Roof flange end of center positioning mark
P, p, R, r
Rear fender indent
C, c
Front pillar joggle
Q, q
Rear pillar inner joggle
D, d, E, e, F, f
Front pillar indent
S
Front floor reinforcement hole center of center
positioning mark
φ
9 (0.35)
BRM-52
< SERVICE DATA AND SPECIFICATIONS (SDS)
BODY ALIGNMENT
Rear Body
INFOID:0000000005513927
Measurement
Dimensions marked with
″
*
″
indicate symmetrically identical dimensions on both the right and left hand of the
vehicle.
Measurement Points
G, g
Side dash joggle
T
Front floor positioning mark of center positioning
mark
H, h, K, k, M,
m, O, o
Center pillar indent
U, u, V, v, W,
w, X, x
Door hinge installing hole center
U, u, V, v, X, x:
φ
12 (0.47)
W, w: 14
×
12 (0.55
×
0.47)
Point
Material
Point
Material
Unit: mm (in)
JSKIA0550GB
BODY ALIGNMENT
BRM-53
< SERVICE DATA AND SPECIFICATIONS (SDS)
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
Unit: mm (in)
: Vehicle front
Point
Material
Point
Material
A
Roof indent of center positioning mark
D, d
Rear fender brace joggle
B, b
Back pillar main joggle
E
Upper rear panel indent of center positioning
mark
C, c
Center dovetail bracket installing hole center
φ
7
(0.28)
JSKIA0551ZZ
BRM-54
< SERVICE DATA AND SPECIFICATIONS (SDS)
LOCATION OF PLASTIC PARTS
LOCATION OF PLASTIC PARTS
Precautions for Plastics
INFOID:0000000005513928
CAUTION:
• When repairing and painting a portion of the body adjacent to plastic parts, consider their characteristics (influence of heat
and solvent) and remove them if necessary or take suitable measures to protect them.
• Plastic parts should be repaired and painted using methods suiting the materials
,
characteristics.
Abbre-
viation
Material name
Heat resisting
temperature
°
C (
°
F)
Resistance to gasoline and
solvents
Other cautions
PE
Polyethylene
60 (140)
Gasoline and most solvents are
harmless if applied for a very
short time (wipe out quickly).
Flammable
ABS
Acrylonitrile Butadiene Styrene
80 (176)
Avoid gasoline and solvents.
—
EPM/
EPDM
Ethylene Propylene (Diene) co-
polymer
80 (176)
Gasoline and most solvents are
harmless if applied for a very
short time (wipe out quickly).
Flammable
PS
Polystyrene
80 (176)
Avoid solvents.
Flammable
PVC
Poly Vinyl Chloride
80 (176)
Gasoline and most solvents are
harmless if applied for a very
short time (wipe out quickly).
Poisonous gas is emitted
when burned.
TPO
Thermoplastic Olefine
80 (176)
↑
Flammable
AAS
Acrylonitrile Acrylic Styrene
85 (185)
Avoid gasoline and solvents.
—
PMMA
Poly Methyl Methacrylate
85 (185)
↑
—
EVAC
Ethylene Vinyl Acetate
90 (194)
↑
—
PP
Polypropylene
90 (194)
Gasoline and most solvents are
harmless if applied for a very
short time (wipe out quickly).
Flammable, avoid bat-
tery acid.
PUR
Polyurethane
90 (194)
Avoid gasoline and solvents.
—
UP
Unsaturated Polyester
90 (194)
↑
Flammable
ASA
Acrylonitrile Styrene Acrylate
100 (212)
↑
Flammable
PPE
Poly Phenylene Ether
110 (230)
↑
—
TPU
Thermoplastic Urethane
110 (230)
↑
—
PBT+
PC
Poly Butylene Terephthalate +
Polycarbonate
120 (248)
↑
Flammable
PC
Polycarbonate
120 (248)
↑
—
POM
Poly Oxymethylene
120 (248)
↑
Avoid battery acid.
PA
Polyamide
140 (284)
↑
Avoid immersing in wa-
ter.
PBT
Poly Butylene Terephthalate
140 (284)
↑
—
PAR
Polyarylate
180 (356)
↑
—
PET
Polyethylene terephthalate
180 (356)
↑
—
PEI
Polyetherimide
200 (392)
↑
—
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст