Nissan Murano Z51. Manual — part 763
FRONT COMBINATION LAMP
EXL-363
< REMOVAL AND INSTALLATION >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
REMOVAL AND INSTALLATION
FRONT COMBINATION LAMP
Exploded View
INFOID:0000000005515216
REMOVAL
DISASSEMBLY
Removal and Installation
INFOID:0000000005515217
REMOVAL
CAUTION:
Disconnect the battery negative terminal or remove the fuse.
1.
Front combination lamp
2.
Headlamp extension panel
JPLIA0812ZZ
1.
Front side marker lamp bulb
2.
Front side marker lamp bulb socket
3.
Halogen bulb (LO)
4.
Halogen bulb (HI)
5.
Front turn signal/parking lamp bulb socket 6.
Front turn signal/parking lamp bulb
7.
Headlamp housing assembly
JPLIA0829ZZ
EXL-364
< REMOVAL AND INSTALLATION >
[HALOGEN TYPE]
FRONT COMBINATION LAMP
1.
Remove the front grille. Refer to
2.
Remove the headlamp extension panel.
3.
Remove the front bumper fascia. Refer to
.
4.
Remove the headlamp mounting bolts.
5.
Remove the harness clips from the headlamp housing.
6.
Pull out the headlamp assembly forward the vehicle.
7.
Disconnect the connector before removing the headlamp assembly.
INSTALLATION
Install in the reverse order of removal.
NOTE:
After installation, perform aiming adjustment. Refer to
Replacement
INFOID:0000000005515218
CAUTION:
• Disconnect the battery negative terminal or remove the fuse.
• After installing the bulb, install the resin cap and the bulb socket securely for watertightness.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
• Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
HEADLAMP BULB (LO)
1.
Remove the fender rubber protector in the engine room.
2.
Rotate the bulb counterclockwise and unlock it.
3.
Disconnect the headlamp bulb connector.
4.
Remove the bulb from the headlamp housing assembly.
HEADLAMP BULB (HI)
1.
Rotate the bulb counterclockwise and unlock it.
2.
Disconnect the headlamp bulb connector.
3.
Remove the bulb from the headlamp housing assembly.
FRONT TURN SIGNAL/PARKING LAMP BULB
1.
Remove the front grille. Refer to
2.
Rotate the front turn signal/parking lamp bulb socket counterclockwise and unlock it.
3.
Remove the bulb from the front turn signal/parking lamp bulb socket.
FRONT SIDE MARKER LAMP BULB
1.
Remove the fender rubber protector in the engine room.
2.
Rotate the front side marker lamp bulb socket counterclockwise and unlock it.
3.
Remove the bulb from the front side marker lamp bulb socket.
Disassembly and Assembly
INFOID:0000000005515219
DISASSEMBLY
1.
Rotate the headlamp bulb (LO) counterclockwise and unlock it
2.
Disconnect the headlamp bulb (LO) connector. And remove the bulb from the headlamp housing assem-
bly.
3.
Rotate the headlamp bulb (HI) counterclockwise and unlock it
4.
Disconnect the headlamp bulb (HI) connector. And remove the bulb from the headlamp housing assem-
bly.
5.
Rotate the front turn signal/parking lamp bulb socket counterclockwise and unlock it.
6.
Remove the bulb from the front turn signal/parking lamp bulb socket.
7.
Rotate the front side marker lamp bulb socket counterclockwise and unlock it.
FRONT COMBINATION LAMP
EXL-365
< REMOVAL AND INSTALLATION >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
8.
Remove the bulb from the front side marker lamp bulb socket.
ASSEMBLY
Assemble in the reverse order of disassembly.
EXL-366
< REMOVAL AND INSTALLATION >
[HALOGEN TYPE]
FRONT FOG LAMP
FRONT FOG LAMP
Exploded View
INFOID:0000000005515220
Removal and Installation
INFOID:0000000005515221
CAUTION:
Disconnect the battery negative terminal or remove the fuse.
REMOVAL
1.
Remove the front fender protector. Keep a service area. Refer to
.
2.
Remove the front fog lamp connector.
3.
Remove the screw.
4.
Disengage the pawl. And then remove the front fog lamp.
INSTALLATION
Installation is the reverse order of removal.
NOTE:
After installation, perform aiming adjustment. Refer to
Replacement
INFOID:0000000005515222
CAUTION:
• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
• Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
FRONT FOG LAMP BULB
1.
Remove the front fender protector. Keep the service area. Refer to
.
1.
Front fog lamp
: Pawl
JPLIA1592ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст