Nissan Murano Z51. Manual — part 799
FSU-20
< SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Measure value under unladen* conditions.
*: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.
FOR MEXICO MODELS
Measure value under unladen* conditions.
*: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.
Rear (Hr)
858 mm (33.78 in)
857 mm (33.74 in)
Item
Standard
Tire size
235/65R18
235/55R20
Grade
S
SL
LE
SFA746B
Item
Standard
Axle
2WD
AWD
Tire size
235/65R18
Grade
S
SL
LE
Front (Hr)
846 mm (33.31 in)
845 mm (33.27 in)
Rear (Hr)
859 mm (33.82 in)
858 mm (33.78 in)
857 mm (33.74 in)
SFA746B
A
B
D
E
F
G
H
I
J
K
L
M
N
P
O
C
QUICK REFERENCE INDEX
A GENERAL INFORMATION
B ENGINE
C HYBRID
HBC
Hybrid Control System
HBB
Hybrid Battery System
HBR
Hybrid Brake System
D TRANSMISSION & DRIVE-
LINE
CL
Clutch
E SUSPENSION
SCS
Suspension Control System
F BRAKES
G STEERING
H RESTRAINTS
SBC
Seat Belt Control System
I
VENTILATION, HEATER &
AIR CONDITIONER
Heater & Air Conditioning System
Heater & Air Conditioning Control System
J BODY INTERIOR
K BODY EXTERIOR,
DOORS, ROOF & VEHICLE
SECURITY
L DRIVER CONTROLS
M ELECTRICAL & POWER
CONTROL
Power Supply, Ground & Circuit Elements
N DRIVER INFORMATION &
MULTIMEDIA
Meter, Warning Lamp & Indicator
SN
Sonar System
Audio, Visual & Navigation System
O CRUISE CONTROL
CCS
Cruise Control System
P MAINTENANCE
All rights reserved. No part
of this Service Manual may
be reproduced or stored in a
retrieval system, or transmit-
ted in any form, or by any
means, electronic, mechani-
cal, recording or otherwise,
without the prior written per-
mission of N
ISSAN
M
OTOR
C
O.,
L
TD
.
Edition: September 2009
Publication No. SM0E-1Z51U0
FOREWORD
This manual contains maintenance and repair procedure for the 2010
NISSAN MURANO.
In order to assure your safety and the efficient functioning of the vehicle,
this manual should be read thoroughly. It is especially important that the
PRECAUTIONS in the GI section be completely understood before starting
any repair task.
All information in this manual is based on the latest product information
at the time of publication. The right is reserved to make changes in specifi-
cations and methods at any time without notice.
IMPORTANT SAFETY NOTICE
The proper performance of service is essential for both the safety of
the technician and the efficient functioning of the vehicle.
The service methods in this Service Manual are described in such a
manner that the service may be performed safely and accurately.
Service varies with the procedures used, the skills of the technician
and the tools and parts available. Accordingly, anyone using service
procedures, tools or parts which are not specifically recommended
by NISSAN must first be completely satisfied that neither personal
safety nor the vehicle’s safety will be jeopardized by the service
method selected.
QUICK REFERENCE CHART MURANO
QUICK REFERENCE CHART MURANO
PFP:00000
ENGINE TUNE-UP DATA (VQ35DE)
ELS0003W
Engine model
VQ35DE
Firing order
1-2-3-4-5-6
Idle speed
CVT (In “P” or “N” position)
rpm
600 ± 50
Ignition timing (BTDC at idle speed)
CVT (In “P” or “N” position)
12
°
± 5
°
CO% at idle
0.7 - 9.9 % and engine runs smoothly
Tensions of drive belt
Auto adjustment by auto tensioner
Radiator cap relief pressure
kPa (kg/cm
2
, psi)
Standard
122.3 - 151.7 (1.2 - 1.5, 17.7 - 22.0)
Limit
108 (1.1, 15.6)
Cooling system leakage testing pres-
sure
kPa (kg/cm
2
, psi)
156 (1.6, 22.6)
Compression pressure
kPa (kg/cm
2
, psi)/rpm
Standard
1,275 (13.0, 185)/300
Minimum
981 (10.0, 142)/300
Spark plug
Make
DENSO
Standard type
FXE22HR11
Gap
Standard
1.1 mm (0.043 in)
Limit
1.4 mm (0.055 in)
2010
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст