Nissan Murano Z51. Manual — part 1438
SHIFT LOCK SYSTEM
TM-103
< DTC/CIRCUIT DIAGNOSIS >
[CVT: RE0F09B]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
Wiring Diagram - CVT SHIFT LOCK SYSTEM -
INFOID:0000000005514067
JCDWM0719GB
TM-104
< DTC/CIRCUIT DIAGNOSIS >
[CVT: RE0F09B]
SHIFT LOCK SYSTEM
JCDWM0720GB
SHIFT LOCK SYSTEM
TM-105
< DTC/CIRCUIT DIAGNOSIS >
[CVT: RE0F09B]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
Component Function Check
INFOID:0000000005514068
1.
CHECK CVT SHIFT LOCK OPERATION
1.
Turn ignition switch ON.
2.
Move selector lever to “P” position.
3.
Attempt to shift selector lever to any other position with brake pedal released.
Can selector lever be shifted to any other position?
JCDWM0721GB
TM-106
< DTC/CIRCUIT DIAGNOSIS >
[CVT: RE0F09B]
SHIFT LOCK SYSTEM
YES
>> Go to
NO
>> GO TO 2.
2.
CHECK CVT SHIFT LOCK OPERATION
Attempt to shift selector lever to any other position with brake pedal depressed.
Can the selector lever be shifted to any other position?
YES
>> INSPECTION END
NO
>> Go to
Diagnosis Procedure
INFOID:0000000005514069
1.
CHECK POWER SOURCE
1.
Turn ignition switch OFF.
2.
Disconnect fuse block (J/B) connector.
3.
Turn ignition switch ON.
4.
Check voltage between fuse block (J/B) connector terminal and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>>
Check the following.
• 10A fuse [No. 3, located in fuse block (J/B)]
• Ignition switch
2.
CHECK HARNESS BETWEEN FUSE BLOCK (J/B) AND STOP LAMP SWITCH (PART 1)
1.
Turn ignition switch OFF.
2.
Disconnect stop lamp switch connector.
3.
Check continuity between fuse block (J/B) vehicle side harness connector terminal and stop lamp switch
vehicle side harness connector terminal.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace damaged parts.
3.
CHECK HARNESS BETWEEN FUSE BLOCK (J/B) AND STOP LAMP SWITCH (PART 2)
Check continuity between stop lamp switch vehicle side harness connector terminal and ground.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace damaged parts.
4.
CHECK STOP LAMP SWITCH
Check stop lamp switch. Refer to
TM-108, "Component Inspection (Stop Lamp Switch)"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Replace stop lamp switch. Refer to
.
Fuse block (J/B) connector
Ground
Voltage (Approx.)
Connector
Terminal
E103
4F
Battery voltage
Fuse block (J/B) vehicle side harness connector
Stop lamp switch vehicle side harness connector
Continuity
Connector
Terminal
Connector
Terminal
E103
4F
E116
3
Existed
Stop lamp switch vehicle side harness connector
Ground
Continuity
Connector
Terminal
E116
3
Not existed
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст