Nissan Murano Z51. Manual — part 1419
SHIFT CONTROL SYSTEM
TM-27
< SYSTEM DESCRIPTION >
[CVT: RE0F09B]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
SHIFT CONTROL SYSTEM
System Diagram
INFOID:0000000005513952
NOTE:
The gear ratio is set for each position separately.
System Description
INFOID:0000000005513953
In order to select the gear ratio that can obtain the driving force in accordance with driver's intention and the
vehicle condition, TCM monitors the driving conditions, such as the vehicle speed and the throttle position,
selects the optimum gear ratio, and determines the gear change steps to the gear ratio. Then TCM sends the
command to the step motor, controls the inflow/outflow of line pressure from the primary pulley to determine
the position of the moving-pulley and controls the gear ratio.
“D” POSITION
Shifting over all the ranges of gear ratios from the lowest to the high-
est.
OVERDRIVE OFF CONDITION
Use this position for improved engine braking.
“L” POSITION
JSDIA1356GB
SCIA1953E
JPDIA0685GB
TM-28
< SYSTEM DESCRIPTION >
[CVT: RE0F09B]
SHIFT CONTROL SYSTEM
By limiting the gear range to the lowest position, the strong driving
force and the engine brake can be secured.
DOWNHILL ENGINE BRAKE CONTROL (AUTO ENGINE BRAKE CONTROL)
When a downhill slope is detected with the accelerator pedal released, the engine brake will be strengthened
up by downshifting so as not to accelerate the vehicle more than necessary.
ACCELERATION CONTROL
According to vehicle speed and a change of accelerator pedal angle, driver's request for acceleration and driv-
ing scene are judged. This function assists improvement in the acceleration feeling by making the engine
speed proportionate to the vehicle speed. And a shift map that can gain a larger driving force is available for
compatibility of mileage with driveability.
JPDIA0686GB
SHIFT CONTROL SYSTEM
TM-29
< SYSTEM DESCRIPTION >
[CVT: RE0F09B]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
Component Parts Location
INFOID:0000000005513954
Component Description
INFOID:0000000005513955
TRANSAXLE ASSEMBLY
JSDIA1368GB
TM-30
< SYSTEM DESCRIPTION >
[CVT: RE0F09B]
SHIFT CONTROL SYSTEM
EXCEPT TRANSAXLE ASSEMBLY
Item
Function
Transmission range switch
Primary speed sensor
Secondary speed sensor
Step motor
Shift control valve
TM-18, "Component Description"
Primary pulley
TM-14, "Component Description"
Secondary pulley
TM-14, "Component Description"
Item
Function
TCM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст