Nissan Murano Z51. Manual — part 1013
MIR-8
< SYSTEM DESCRIPTION >
[WITH ADP]
DIAGNOSIS SYSTEM (DRIVER SEAT CONTROL UNIT)
DIAGNOSIS SYSTEM (DRIVER SEAT CONTROL UNIT)
Diagnosis Description
INFOID:0000000005513399
The auto drive positioner system can be checked and diagnosed for component operation with CONSULT-III.
DIAGNOSTIC MODE
CONSULT-III Function
INFOID:0000000005513400
SELF-DIAGNOSIS RESULTS
DATA MONITOR
Diagnostic mode
[AUTO DRIVE POS.]
Description
WORK SUPPORT
Changes the setting of each function.
SELF-DIAG RESULTS
Performs self-diagnosis for the auto drive positioner system and displays the results.
DATA MONITOR
Displays input signals transmitted from various switches and sensors to driver seat con-
trol unit in real time.
CAN DIAG SUPPORT MNTR
The result of transmit/receive diagnosis of CAN communication can be read.
ACTIVE TEST
Drive each output device.
ECU IDENTIFICATION
Displays part numbers of driver seat control unit parts.
Monitor Item
Unit
Main
Signals
Selection
From
Menu
Contents
SET SW
“ON/OFF”
×
×
ON/OFF status judged from the setting switch signal.
MEMORY SW 1
“ON/OFF”
×
×
ON/OFF status judged from the seat memory switch 1 sig-
nal.
MEMORY SW 2
“ON/OFF”
×
×
ON/OFF status judged from the seat memory switch 2 sig-
nal.
SLIDE SW–FR
“ON/OFF”
×
×
ON/OFF status judged from the sliding switch (forward) sig-
nal.
SLIDE SW–RR
“ON/OFF”
×
×
ON/OFF status judged from the sliding switch (backward)
signal.
RECLN SW–FR
“ON/OFF”
×
×
ON/OFF status judged from the reclining switch (forward)
signal.
RECLN SW–RR
“ON/OFF”
×
×
ON/OFF status judged from the reclining switch (backward)
signal.
LIFT FR SW–UP
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch front (up) sig-
nal.
LIFT FR SW–DN
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch front (down)
signal.
LIFT RR SW–UP
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch rear (up) sig-
nal.
LIFT RR SW–DN
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch rear (down)
signal.
MIR CON SW–UP
“ON/OFF”
×
×
ON/OFF status judged from the mirror switch (up) signal.
MIR CON SW–DN
“ON/OFF”
×
×
ON/OFF status judged from the mirror switch (down) signal.
MIR CON SW–RH
“ON/OFF”
×
×
ON/OFF status judged from the door mirror remote control
switch (passenger side) signal.
MIR CON SW–LH
“ON/OFF”
×
×
ON/OFF status judged from the door mirror remote control
switch (driver side) signal.
DIAGNOSIS SYSTEM (DRIVER SEAT CONTROL UNIT)
MIR-9
< SYSTEM DESCRIPTION >
[WITH ADP]
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
MIR CHNG SW–R
“ON/OFF”
×
×
ON/OFF status judged from the door mirror remote control
switch (switching to right) signal.
MIR CHNG SW–L
“ON/OFF”
×
×
ON/OFF status judged from the door mirror remote control
switch (switching to left) signal.
TILT SW-UP
“ON/OFF”
×
×
ON/OFF status judged from the tilt switch (up) signal.
TILT SW-DOWN
“ON/OFF”
×
×
ON/OFF status judged from the tilt switch (down) signal.
TELESCO SW-FR
“ON/OFF”
×
×
ON/OFF status judged from the telescoping switch (for-
ward) signal.
TELESCO SW-RR
“ON/OFF”
×
×
ON/OFF status judged from the telescoping switch (back-
ward) signal.
DETENT SW
“ON/OFF”
×
×
The selector lever position “OFF (P position) / ON (other
than P position)” judged from the detention switch signal.
STARTER SW
“ON/OFF”
×
×
Ignition key switch ON (START, ON) /OFF (ACC, OFF) sta-
tus judged from the ignition switch signal.
SLIDE PULSE
—
–
×
Value (32768) when battery connections are standard. If it
moves backward, the value increases. If it moves forward,
the value decreases.
RECLN PULSE
—
–
×
Value (32768) when battery connections are standard. If it
moves backward, the value increases. If it moves forward,
the value decreases.
LIFT FR PULSE
—
–
×
Value (32768) when battery connections are standard. If it
moves DOWN, the value increases. If it moves UP, the val-
ue decreases.
LIFT RR PULSE
—
–
×
Value (32768) when battery connections are standard. If it
moves DOWN, the value increases. If it moves UP, the val-
ue decreases.
MIR/SEN RH U–D
“V”
–
×
Voltage input from door mirror sensor (passenger side) up/
down is displayed.
MIR/SEN RH R–L
“V”
–
×
Voltage input from door mirror sensor (passenger side) left/
right is displayed.
MIR/SEN LH U–D
“V”
–
×
Voltage input from door mirror sensor (driver side) up/down
is displayed.
MIR/SEN LH R–L
“V”
–
×
Voltage input from door mirror sensor (driver side) left/right
is displayed.
TILT PULSE
—
–
×
Value (32768) when battery connections are standard. If it
moves DOWN, the value increases. If it moves UP, the val-
ue decreases.
TELESCO PULSE
—
–
×
Value (32768) when battery connections are standard. If it
moves backward, the value increases. If it moves forward,
the value decreases.
VEHICLE SPEED
—
×
×
Display the vehicle speed signal received from combination
meter by numerical value [km/h].
P RANG SW CAN
“ON/OFF”
×
×
ON/OFF status judged from the P range switch signal.
R RANGE (CAN)
“ON/OFF”
×
×
ON/OFF status judged from the R range switch signal.
DOOR SW–FL
“ON/OFF”
×
×
ON/OFF status judged from the door switch (front driver
side) signal.
DOOR SW–FR
“ON/OFF”
×
×
ON/OFF status judged from the door switch (front passen-
ger side) signal.
IGN ON SW
“ON/OFF”
×
×
ON/OFF status judged from the ignition switch signal.
ACC ON SW
“ON/OFF”
×
×
ON/OFF status judged from the ACC switch signal.
KEY ON SW
“ON/OFF”
×
×
ON/OFF status judged from the key on switch signal.
Monitor Item
Unit
Main
Signals
Selection
From
Menu
Contents
MIR-10
< SYSTEM DESCRIPTION >
[WITH ADP]
DIAGNOSIS SYSTEM (DRIVER SEAT CONTROL UNIT)
ACTIVE TEST
CAUTION:
When driving vehicle, do not perform active test.
WORK SUPPORT
KEYLESS ID
—
×
×
Key ID status judged from the key ID signal.
KYLS DR UNLK
“ON/OFF”
×
×
ON/OFF status judged from the driver side door unlock ac-
tuator output switch signal.
VHCL SPEED (ABS)
“ON/OFF”
×
×
ON/OFF status judged from vehicle speed signal.
HANDLE
“RHD/LHD”
×
×
RHD/LHD status judged from handle position signal.
TRANSMISSION
“AT or CVT/
MT”
×
×
AT or CVT/MT status judged from transmission.
STEERING STATUS
“LOCK/UN-
LOCK”
×
×
LOCK/UNLOCK status judged from steering lock unit.
Monitor Item
Unit
Main
Signals
Selection
From
Menu
Contents
Test item
Description
SEAT SLIDE
Activates/deactivates the sliding motor.
SEAT RECLINING
Activates/deactivates the reclining motor.
SEAT LIFTER FR
Activates/deactivates the lifting motor (front).
SEAT LIFTER RR
Activates/deactivates the lifting motor (rear).
TILT MOTOR
Activates/deactivates the tilt motor.
TELESCO MOTOR
Activates/deactivates the telescopic motor.
MIRROR MOTOR RH
Activates/deactivates the mirror motor (passenger side).
MIRROR MOTOR LH
Activates/deactivates the mirror motor (driver side).
MEMORY SW INDCTR
Turns ON/OFF the memory indicator.
Work item
Content
Item
SEAT SLIDE VOLUME SET
The amount of seat sliding for entry/exit assist can be selected
from 3 items.
40 mm
80 mm
150 mm
EXIT TILT SETTING
Entry/exit assist (steering column) can be selected:
ON (operated) – OFF (not operated)
ON
OFF
EXIT SEAT SLIDE SETTING
Entry/exit assist (seat) can be selected:
ON (operated) – OFF (not operated)
ON
OFF
DOOR MIRROR REMOTE CONTROL SWITCH
MIR-11
< DTC/CIRCUIT DIAGNOSIS >
[WITH ADP]
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
DTC/CIRCUIT DIAGNOSIS
DOOR MIRROR REMOTE CONTROL SWITCH
MIRROR SWITCH
MIRROR SWITCH : Description
INFOID:0000000005513401
It operates angle of the door mirror face.
It transmits mirror face adjust operation to AUTOMATIC DRIVE POSITIONER CONTROL UNIT.
MIRROR SWITCH : Component Function Check
INFOID:0000000005513402
1.
CHECK MIRROR SWITCH FUNCTION
Check the operation on “MIR CON SW–UP/DN” and “MIR CON SW–RH/LH” in “DATA MONITOR” mode
with CONSULT-III.
Is the inspection result normal?
YES
>> Mirror switch function is OK.
NO
>> Refer to
MIR-11, "MIRROR SWITCH : Diagnosis Procedure"
.
MIRROR SWITCH : Diagnosis Procedure
INFOID:0000000005513403
1.
CHECK MIRROR SWITCH INPUT SIGNAL
1.
Turn ignition switch OFF.
2.
Disconnect door mirror remote control switch connector.
3.
Turn ignition switch ON.
4.
Check voltage between door mirror remote control switch harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> GO TO 2.
2.
CHECK MIRROR SWITCH CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect automatic drive positioner control unit connector.
3.
Check continuity between automatic drive positioner control unit harness connector and door mirror
remote control switch harness connector.
Monitor item
Condition
MIR CON SW-UP/DN
When operating the mirror switch toward the up or down side.
: ON
Other than above.
: OFF
MIR CON SW-RH/LH
When operating the mirror switch toward the right or left side.
: ON
Other than above.
: OFF
(+)
(–)
Voltage (V)
(Approx.)
Door mirror remote control switch
Connector
Terminal
D14
4
Ground
5
12
13
15
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст