Nissan Murano Z51. Manual — part 441
DLK-272
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
HAZARD AND HORN REMINDER DOES NOT OPERATE
HAZARD AND HORN REMINDER DOES NOT OPERATE
Description
INFOID:0000000005517703
NOTE:
• Before performing the diagnosis following procedure, check “Work Flow”. Refer to
.
• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and
check each symptom.
CONDITIONS OF VEHICLE (OPERATION CONDITIONS)
• Ignition switch is in OFF or LOCK position.
• Intelligent Key is removed from key slot.
Diagnosis Procedure
INFOID:0000000005517704
1.
CHECK “HAZARD ANSWER BACK” SETTING IN “WORK SUPPORT”
Check “HAZARD ANSWER BACK” setting in “WORK SUPPORT”.
Refer to
DLK-56, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set “HAZARD ANSWER BACK” setting in “WORK SUPPORT”.
2.
CHECK “HORN WITH KEYLESS LOCK” SETTING IN “WORK SUPPORT”.
Check “HORN WITH KEYLESS LOCK” setting in “WORK SUPPORT”.
Refer to
DLK-56, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Set “HORN WITH KEYLESS LOCK” setting in “WORK SUPPORT”.
3.
CHECK HAZARD WARNING LAMP
Check hazard warning lamp.
Refer to
DLK-140, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK HORN
Check horn.
Refer to
DLK-135, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
NO
>> GO TO 1.
AUTO DOOR LOCK OPERATION DOES NOT OPERATE
DLK-273
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
AUTO DOOR LOCK OPERATION DOES NOT OPERATE
Description
INFOID:0000000005517705
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
Diagnosis Procedure
INFOID:0000000005517706
1.
CHECK “AUTO LOCK SET” SETTING IN “WORK SUPPORT”
Check “AUTO LOCK SET” setting in “WORK SUPPORT”.
Refer to
DLK-56, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set “AUTO LOCK SET” setting in “WORK SUPPORT”.
2.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
NO
>> GO TO 1.
DLK-274
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
DOOR DOES NOT LOCK/UNLOCK WITH DOOR REQUEST SWITCH
DOOR DOES NOT LOCK/UNLOCK WITH DOOR REQUEST SWITCH
DRIVER SIDE
DRIVER SIDE : Description
INFOID:0000000005517707
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and
check each symptom.
CONDITIONS OF VEHICLE (OPERATING CONDITIONS)
• Intelligent Key is removed from key slot.
• Ignition switch is in OFF position.
• No Intelligent Keys are inside the vehicle.
DRIVER SIDE : Diagnosis Procedure
INFOID:0000000005517708
1.
CHECK REMOTE KEYLESS ENTRY FUNCTION
Check remote keyless entry function.
Does door lock/unlock with Intelligent key button?
YES
>> GO TO 2.
NO
>> Go to
.
2.
CHECK “LOCK/UNLOCK BY I-KEY” SETTING IN “WORK SUPPORT”
Check “LOCK/UNLOCK BY I-KEY” in “WORK SUPPORT”.
Refer to
DLK-56, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Set “LOCK/UNLOCK BY I-KEY” in “WORK SUPPORT”.
3.
CHECK DOOR REQUEST SWITCH
Check door request switch (driver side).
Refer to
DLK-119, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK OUTSIDE KEY ANTENNA
Check outside key antenna (driver side).
Refer to
DLK-125, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check Intermittent Incident. Refer to
GI-39, "Intermittent Incident"
.
NO
>> GO TO 1.
PASSENGER SIDE
PASSENGER SIDE : Description
INFOID:0000000005517709
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
DOOR DOES NOT LOCK/UNLOCK WITH DOOR REQUEST SWITCH
DLK-275
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and
check each symptom.
CONDITIONS OF VEHICLE (OPERATING CONDITIONS)
• Intelligent Key is removed from key slot.
• Ignition switch is in OFF position.
• No Intelligent Keys are inside the vehicle.
PASSENGER SIDE : Diagnosis Procedure
INFOID:0000000005517710
1.
CHECK REMOTE KEYLESS ENTRY FUNCTION
Check remote keyless entry function.
Does door lock/unlock with Intelligent key button?
YES
>> GO TO 2.
NO
>> Go to
.
2.
CHECK “LOCK/UNLOCK BY I-KEY” SETTING IN “WORK SUPPORT”
Check “LOCK/UNLOCK BY I-KEY” in “WORK SUPPORT”.
Refer to
DLK-56, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Set “LOCK/UNLOCK BY I-KEY” in “WORK SUPPORT”.
3.
CHECK DOOR REQUEST SWITCH
Check door request switch (passenger side).
Refer to
DLK-119, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK OUTSIDE KEY ANTENNA
Check outside key antenna (passenger side).
Refer to
DLK-125, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check Intermittent Incident. Refer to
GI-39, "Intermittent Incident"
NO
>> GO TO 1.
BACK DOOR
BACK DOOR : Description
INFOID:0000000005517711
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and
check each symptom.
CONDITIONS OF VEHICLE (OPERATING CONDITIONS)
• Intelligent Key is removed from key slot.
• Ignition switch is in OFF position.
• No Intelligent Keys are inside the vehicle.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст