Nissan Murano Z51. Manual — part 733
TAIL LAMP CIRCUIT
EXL-243
< DTC/CIRCUIT DIAGNOSIS >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
2.
Disconnect IPDM E/R connector.
3.
Check continuity between the IPDM E/R harness connector and the rear combination lamp harness con-
nector.
Does continuity exist?
YES
>> GO TO 4.
NO
>> Repair the harnesses or connectors.
4.
CHECK TAIL LAMP GROUND OPEN CIRCUIT
Check continuity between the rear combination lamp harness connector and the ground.
Does continuity exist?
YES
>> Replace the rear combination lamp.
NO
>> Repair the harnesses or connectors.
IPDM E/R
Rear combination lamp
Continuity
Connector
Terminal
Connector
Terminal
RH
E10
7
B59
4
Existed
LH
B80
4
Rear combination lamp
Ground
Continuity
Connector
Terminal
RH
B59
1
Existed
LH
B80
1
EXL-244
< DTC/CIRCUIT DIAGNOSIS >
[HALOGEN TYPE]
LICENSE PLATE LAMP CIRCUIT
LICENSE PLATE LAMP CIRCUIT
Component Function Check
INFOID:0000000005515183
1.
CHECK LICENSE PLATE LAMP OPERATION
IPDM E/R AUTO ACTIVE TEST
1.
Activate IPDM E/R auto active test. Refer to
PCS-10, "Diagnosis Description"
2.
Check that the license plate lamp is turned ON.
CONSULT-III ACTIVE TEST
1.
Select “EXTERNAL LAMPS” of IPDM E/R active test item.
2.
With operating the lighting switch, check that the license plate lamp is turned ON.
Is the license plate lamp turned ON?
YES
>> License plate lamp circuit is normal.
NO
>> Refer to
EXL-244, "Diagnosis Procedure"
.
Diagnosis Procedure
INFOID:0000000005515184
1.
CHECK LICENSE PLATE LAMP BULB
Check the applicable lamp bulb.
Is the bulb normal?
YES
>> GO TO 2.
NO
>> Replace the bulb.
2.
CHECK LICENSE PLATE LAMP OPEN CIRCUIT
1.
Turn the ignition switch OFF.
2.
Disconnect IPDM E/R connector and the license plate lamp connector.
3.
Check continuity between the IPDM E/R harness connector and the license plate lamp harness connec-
tor.
Does continuity exist?
YES
>> GO TO 3.
NO
>> Repair the harnesses or connectors.
3.
CHECK LICENSE PLATE LAMP GROUND OPEN CIRCUIT
Check continuity between the license plate lamp harness connector and the ground.
Does continuity exist?
YES
>> Replace the license plate lamp.
NO
>> Repair the harnesses or connectors.
TAIL
: License plate lamp ON
Off
: License plate lamp OFF
IPDM E/R
License plate lamp
Continuity
Connector
Terminal
Connector
Terminal
RH
E10
7
D163
1
Existed
LH
D162
1
License plate lamp
Ground
Continuity
Connector
Terminal
RH
D163
2
Existed
LH
D162
2
HEADLAMP SYSTEM
EXL-245
< DTC/CIRCUIT DIAGNOSIS >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
HEADLAMP SYSTEM
Wiring Diagram - HEADLAMP -
INFOID:0000000005515185
JCLWM2748GB
EXL-246
< DTC/CIRCUIT DIAGNOSIS >
[HALOGEN TYPE]
HEADLAMP SYSTEM
JCLWM4148GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст