Nissan Murano Z51. Manual — part 30
ADP-112
< DTC/CIRCUIT DIAGNOSIS >
DOOR MIRROR MOTOR
4.
Check continuity between automatic drive positioner control unit connector and ground.
[Door mirror driver side]
[Door mirror passenger side]
Is the inspection result normal?
YES
>> Replace automatic drive positioner control unit. Refer to
ADP-210, "Removal and Installation"
NO
>> Repair or replace harness or connector.
3.
CHECK DOOR MIRROR MOTOR
Check door mirror motor.
Refer to
ADP-112, "Component Inspection"
Is the inspection result normal?
YES
>> Check intermittent incident.Refer to
GI-39, "Intermittent Incident"
NO
>> Replace door mirror. Refer to
MIR-72, "DOOR MIRROR ASSEMBLY : Removal and Installation"
.
Component Inspection
INFOID:0000000005515411
1.
CHECK DOOR MIRROR MOTOR-I
Check that door mirror motor does not trap foreign objects and does not have any damage.
Refer to
MIR-71, "DOOR MIRROR ASSEMBLY : Exploded View"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace door mirror.Refer to
MIR-72, "DOOR MIRROR ASSEMBLY : Removal and Installation"
2.
CHECK DOOR MIRROR MOTOR-II
1.
Turn ignition switch OFF.
2.
Disconnect door mirror connector.
3.
Apply 12V to each power supply terminal of door mirror motor.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace door mirror. Refer to
MIR-72, "DOOR MIRROR ASSEMBLY : Removal and Installation"
.
Automatic drive positioner control unit
Ground
Continuity
Connector
Terminal
M75
12
Not existed
23
24
Automatic drive positioner control unit
Ground
Continuity
Connector
Terminal
M75
22
Not existed
10
11
Door mirror
Operational direction
Connector
Terminal
(+)
(–)
D3 (Driver side)
D43 (Passenger side)
10
11
RIGHT
11
10
LEFT
12
10
UP
10
12
DOWN
SEAT MEMORY INDICATOR
ADP-113
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
SEAT MEMORY INDICATOR
Description
INFOID:0000000005515412
• Memory switch is equipped on the seat memory switch installed to the driver side door trim. The operation
signal is inputted to the driver seat control unit when the memory switch is operated.
• The status of automatic drive positioner system can be checked according to the illuminating/flashing status.
Component Function Check
INFOID:0000000005515413
1.
CHECK FUNCTION
1.
Select “MEMORY SW INDCTR” in “Active test” mode with CONSULT-III.
2.
Check the memory indicator operation.
Is the operation of relevant parts normal?
YES
>> INSPECTION END
NO
>> Perform diagnosis procedure. Refer to
ADP-113, "Diagnosis Procedure"
.
Diagnosis Procedure
INFOID:0000000005515414
1.
CHECK SEAT MEMORY INDICATOR OPERATION
Check seat memory indicator operation.
Which is the malfunctioning indicator?
All indicators are NG>>GO TO 2.
An indicator is NG>>GO TO 4.
2.
CHECK FUSE
1.
Turn ignition switch OFF.
2.
Check that the blown fuse after repairing the affected circuit if a fuse is blown.
Is the fuse blown?
YES
>> Replace the blown fuse after repairing the affected circuit if a fuse is blown.
NO
>> GO TO 3.
3.
CHECK MEMORY INDICATOR POWER SUPPLY
Check voltage between seat memory switch harness connector and ground.
Is the inspection result normal?
YES
>> Replace seat memory switch.Refer to
ADP-211, "Removal and Installation"
NO
>> Repair or replace harness or connector.
4.
CHECK MEMORY INDICATOR CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect driver seat control unit and seat memory switch connector.
Test item
Description
MEMORY SW INDCTR
OFF
Memory switch indicator
OFF
ON-1
Indicator 1: ON
ON-2
Indicator 2: ON
Signal name
Fuse No.
Battery power supply
10 (10A)
(+)
(–)
Voltage (V)
(Approx.)
Seat memory switch
Connector
Terminals
D13
5
Ground
Battery voltage
ADP-114
< DTC/CIRCUIT DIAGNOSIS >
SEAT MEMORY INDICATOR
3.
Check continuity between driver seat control unit harness connector and seat memory switch harness
connector.
4.
Check continuity between driver seat control unit harness connector and ground.
Is the inspection result normal?
YES
>> Replace driver seat control unit.Refer to
ADP-209, "Removal and Installation"
NO
>> Repair or replace harness or connector.
Driver seat control unit
Seat memory switch
Continuity
Connector
Terminal
Connector
Terminal
B452
25
D13
6
Existed
26
7
Driver seat control unit
Ground
Continuity
Connector
Terminal
B452
25
Not existed
26
DRIVER SEAT CONTROL UNIT
ADP-115
< ECU DIAGNOSIS INFORMATION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
ECU DIAGNOSIS INFORMATION
DRIVER SEAT CONTROL UNIT
Reference Value
INFOID:0000000005515415
VALUES ON THE DIAGNOSIS TOOL
CONSULT-III MONITOR ITEM
Monitor Item
Condition
Value/Status
SET SW
Set switch
Push
ON
Release
OFF
MEMORY SW1
Memory switch 1
Push
ON
Release
OFF
MEMORY SW2
Memory switch 2
Push
ON
Release
OFF
SLIDE SW–FR
Sliding switch (forward)
Operate
ON
Release
OFF
SLIDE SW–RR
Sliding switch (backward)
Operate
ON
Release
OFF
RECLN SW–FR
Reclining switch (forward)
Operate
ON
Release
OFF
RECLN SW–RR
Reclining switch (back-
ward)
Operate
ON
Release
OFF
LIFT FR SW–UP
Lifting switch front (up)
Operate
ON
Release
OFF
LIFT FR SW–DN
Lifting switch front (down)
Operate
ON
Release
OFF
LIFT RR SW–UP
Lifting switch rear (up)
Operate
ON
Release
OFF
LIFT RR SW–DN
Lifting switch rear (down)
Operate
ON
Release
OFF
MIR CON SW–UP
Mirror switch
Up
ON
Other than above
OFF
MIR CON SW–DN
Mirror switch
Down
ON
Other than above
OFF
MIR CON SW–RH
Mirror switch
Right
ON
Other than above
OFF
MIR CON SW–LH
Mirror switch
Left
ON
Other than above
OFF
MIR CHNG SW–R
Changeover switch
Right
ON
Other than above
OFF
MIR CHNG SW–L
Changeover switch
Left
ON
Other than above
OFF
TILT SW-UP
Tilt switch
Upward
ON
Other than above
OFF
TILT SW-DOWN
Tilt switch
Downward
ON
Other than above
OFF
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст