Nissan Murano Z51. Manual — part 902
INTERIOR ROOM LAMP BATTERY SAVER SYSTEM
INL-9
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
Each function of interior room lamp battery saver can be set by CONSULT-III. Refer to
SAVER : CONSULT-III Function (BCM - BATTERY SAVER)"
Component Parts Location
INFOID:0000000005516761
1.
Personal lamp
2.
Request switch
3.
Step lamp
4.
Door switch
5.
Key cylinder switch
6.
Key slot
7.
Map lamp
8.
Vanity mirror lamp
9.
Door lock switch
10. Remote keyless entry receiver
11.
BCM
12.
Luggage room lamp
13. Back door switch
A.
Over the glove box
B.
Behind the combination meter
C.
Back door
D.
Back door lock assembly
JPLIA0846ZZ
INL-10
< SYSTEM DESCRIPTION >
INTERIOR ROOM LAMP BATTERY SAVER SYSTEM
Component Description
INFOID:0000000005516762
Part
Description
BCM
Operates the interior room lamp battery saver depending on the vehicle condition to
cut the interior room lamp power supply.
Remote keyless entry receiver
• Receives the lock/unlock signal from keyfob.
• Transmits the lock/unlock signal to BCM.
• Request switch
• Key cylinder lock/unlock switch
• Door lock/unlock switch
Inputs the lock/unlock signal to BCM.
• Door switch
• Back door switch
Inputs a switch signal to BCM.
Key slot
Inputs the Intelligent Key in status to BCM.
ILLUMINATION CONTROL SYSTEM
INL-11
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
ILLUMINATION CONTROL SYSTEM
System Diagram
INFOID:0000000005516763
System Description
INFOID:0000000005516764
OUTLINE
Each illumination lamp is controlled by each function of BCM, IPDM E/R and combination meter.
Control by BCM
• Combination switch reading function
• Headlamp control function
Control by IPDM E/R
• Relay control function
Control by combination meter
• Meter illumination control function (Refer to
MWI-24, "METER ILLUMINATION CONTROL : System Descrip-
ILLUMINATION CONTROL
• BCM detects the combination switch condition by the combination switch reading function.
• BCM transmits position light request signal to IPDM E/R and combination meter according to tail lamp ON
condition.
Tail lamp ON condition
- Lighting switch 1ST
- Lighting switch 2ND
- Lighting switch AUTO, and the auto light function ON judgment (With auto light system)
• IPDM E/R turns the integrated tail lamp relay ON according to position light request signal. It provides the
power supply to each illumination lamp.
• Combination meter enters in the nighttime mode according to position light request signal. Under the night-
time mode the combination meter controls the illuminance by controlling the each illumination lamp (ground
side).
JPLIA0855GB
INL-12
< SYSTEM DESCRIPTION >
ILLUMINATION CONTROL SYSTEM
Component Parts Location
INFOID:0000000005516765
Component Description
INFOID:0000000005516766
1.
Combination meter
2.
Illumination control switch
3.
Combination switch
4.
IPDM E/R
5.
BCM
A
Engine room (LH)
B.
Behind the combination meter
JPLIA0847ZZ
Part
Description
BCM
• Detects each switch condition by the combination switch reading function.
• Judges the illumination lamp ON/OFF status depending on the vehicle condition.
And then it transmits position light request signal to IPDM E/R and combination
meter (with CAN communication).
IPDM E/R
Controls the integrated relay according to the request from BCM (with CAN communi-
cation).
Combination meter
• Enters in nighttime mode according to the request from BCM (with CAN communi-
cation).
• Controls the each illumination in the nighttime mode.
Refer to
MWI-24, "METER ILLUMINATION CONTROL : System Description"
Combination switch
(Lighting & turn signal switch)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст