Nissan Murano Z51. Manual — part 1005
RECOMMENDED FLUIDS AND LUBRICANTS
MA-15
< PERIODIC MAINTENANCE >
C
D
E
F
G
H
I
J
K
L
M
B
MA
N
O
A
RECOMMENDED FLUIDS AND LUBRICANTS
FOR NORTH AMERICA
FOR NORTH AMERICA : Fluids and Lubricants
INFOID:0000000005516134
*1: For further details, see “Engine Oil Recommendation”.
*2: Using transmission fluid other than Genuine NISSAN CVT Fluid NS-2 will damage the CVT, which is not covered by the NIS-
SAN new vehicle limited warranty.
*3: For hot climates, viscosity SAE 90 is suitable for ambient temperatures above 0
°
C (32
°
F).
*4: DEXRON
TM
VI type ATF may also be used.
*5: Available in mainland U.S.A. through a NISSAN dealer.
FOR NORTH AMERICA : Engine Oil Recommendation
INFOID:0000000005516135
NISSAN recommends the use of an energy conserving oil in order to improve fuel economy.
Select only engine oils that meet the American Petroleum Institute (API) certification and International Lubri-
cant Standardization and Approval Committee (ILSAC) certification and SAE viscosity standard. These oils
have the API certification mark on the front of the container. Oils which do not have the specified quality label
should not be used as they could cause engine damage.
Capacity (Approximate)
Recommended Fluids/Lubricants
US measure
Imp measure
Liter
Engine oil
Drain and refill
With oil filter
change
4-7/8 qt
4 qt
4.6
Engine oil with API Certification Mark*
1
Viscosity SAE 5W-30
Without oil filter
change
4-1/2 qt
3-3/4 qt
4.3
Dry engine (Overhaul)
5-5/8 qt
4-5/8 qt
5.3
Cooling system
With reservoir
tank
9-7/8 qt
8-1/4 qt
9.4
Genuine NISSAN Long Life Antifreeze/Cool-
ant or equivalent
Reservoir tank
7/8 qt
3/4 qt
0.8
CVT fluid
10-6/8 qt
9 qt
10.2
Genuine NISSAN CVT Fluid NS-2*
2
Differential gear oil
1-1/8 pt
1 pt
0.55
Genuine NISSAN Differential Oil Hypoid Su-
per GL-5 80W-90 or API GL-5, Viscosity SAE
80W-90*
3
Transfer oil
5/8 pt
1/2 pt
0.31
Genuine NISSAN Differential Oil Hypoid Su-
per GL-5 80W-90 or API GL-5, Viscosity SAE
80W-90
Power steering fluid (PSF)
1-1/8 qt
7/8 qt
1.0
Genuine NISSAN PSF or equivalent*
4
Brake fluid
—
—
—
Genuine NISSAN Super Heavy Duty Brake
Fluid*
5
or equivalent DOT 3 (US FMVSS No.
116)
Multi-purpose grease
—
—
—
NLGI No. 2 (Lithium soap base)
Windshield washer fluid
—
—
—
Genuine NISSAN Windshield Washer Con-
centrate Cleaner & Antifreeze or equivalent
Fuel recommendation
—
—
—
Refer to
MA-16
< PERIODIC MAINTENANCE >
RECOMMENDED FLUIDS AND LUBRICANTS
FOR NORTH AMERICA : Anti-Freeze Coolant Mixture Ratio
INFOID:0000000005516136
The engine cooling system is filled at the factory with a high-quality,
year-round, anti-freeze coolant solution. The anti-freeze solution
contains rust and corrosion inhibitors. Therefore, additional cooling
system additives are not necessary.
CAUTION:
When adding or replacing coolant, be sure to use only Genuine
Nissan Long Life Antifreeze/Coolant or equivalent with the
proper mixture ratio of 50% anti-freeze and 50% demineralized
water/distilled water.
Other types of coolant solutions may damage your cooling sys-
tem.
FOR MEXICO
FOR MEXICO : Fluids and Lubricants
INFOID:0000000005516137
*1: For further details, see “SAE Viscosity Number”.
*2: Use Genuine NISSAN Engine Coolant or equivalent in its quality, in order to avoid possible aluminum corrosion within the engine
cooling system caused by the use of non-genuine engine coolant.
Note that any repairs for the incidents within the engine cooling system while using non-genuine engine coolant may not be
covered by the warranty even if such incidents occurred during the warranty period.
*3:Using transmission fluid other than Genuine NISSAN CVT fluid NS-2 will damage the CVT, which is not covered by the war-
ranty.
*4: DEXRON™ VI type ATF may also be used.
1.
API certification mark
2.
API service symbol
SAIA1514E
SMA947CA
Capacity (Approximate)
Recommended Fluids/Lubricants
Liter
Imp measure
Engine oil
Drain and refill
With oil filter change
4.6
4 qt
Genuine NISSAN engine oil*
1
API grade SL or SM*
1
ILSAC grade GF-2, GF-3 or GF-4*
1
Viscosity SAE 10W-30
Without oil filter change
4.3
3-3/4 qt
Dry engine (engine overhaul)
5.3
4-5/8 qt
Cooling system (with reservoir)
9.4
8-1/4 qt
Genuine NISSAN Engine Coolant or equivalent in
its quality*
2
Reservoir tank
0.8
3/4 qt
Transfer oil
0.31
1/2 pt
Genuine NISSAN Differential Oil Hypoid Super
GL-5 80W-90 or API GL-5, Viscosity SAE 80W-90
Differential gear oil
0.55
1 pt
CVT fluid
10.2
9 qt
Genuine NISSAN CVT fluid NS-2*
3
Power steering fluid (PSF)
1.0
7/8 qt
Genuine NISSAN PSF or equivalent*
4
Brake fluid
—
—
Genuine NISSAN Brake Fluid or equivalent DOT 3
(US FMVSS No. 116)
Multi-purpose grease
—
—
NLGI No. 2 (Lithium soap base)
RECOMMENDED FLUIDS AND LUBRICANTS
MA-17
< PERIODIC MAINTENANCE >
C
D
E
F
G
H
I
J
K
L
M
B
MA
N
O
A
FOR MEXICO : SAE Viscosity Number
INFOID:0000000005516138
GASOLINE ENGINE
• 10W-30 is preferable.
5W-30 is also preferable and will improve fuel economy.
If 10W-30 or 5W-30 is not available, select the viscosity, from the
chart, that is suitable for the outside temperature range.
FOR MEXICO : Engine Coolant Mixture Ratio
INFOID:0000000005516139
The engine cooling system is filled at the factory with a high-quality,
year-round and extended life engine coolant. The high quality engine
coolant contains the specific solutions effective for the anti-corrosion
and the anti-freeze function. Therefore, additional cooling system
additives are not necessary.
CAUTION:
• When adding or replacing coolant, be sure to use only Genu-
ine NISSAN Engine Coolant or equivalent in its quality with
the proper mixture ratio. See the examples shown right.
The use of other types of engine coolant may damage your
cooling system.
• When checking the engine coolant mixture ratio by the coolant
hydrometer, use the chart below to correct your hydrometer reading (specific gravity) according to coolant
temperature.
Mixed coolant specific gravity
Unit: specific gravity
WARNING:
Never remove the radiator cap when the engine is hot. Serious burns could be caused by high pres-
sure fluid escaping from the radiator. Wait until the engine and radiator cool down.
JPPIA0003GB
SMA089D
Engine coolant mixture
ratio
Coolant temperature
°
C (
°
F)
15 (59)
25 (77)
35 (95)
45 (113)
30%
1.046 - 1.050
1.042 - 1.046
1.038 - 1.042
1.033 - 1.038
50%
1.076 - 1.080
1.070 - 1.076
1.065 - 1.071
1.059 - 1.065
MA-18
< PERIODIC MAINTENANCE >
ENGINE MAINTENANCE
ENGINE MAINTENANCE
DRIVE BELT
DRIVE BELT : Exploded View
INFOID:0000000005516140
DRIVE BELT : Checking
INFOID:0000000005516141
WARNING:
Be sure to perform the this step when engine is stopped.
• Check that the indicator (A) of drive belt auto-tensioner is within the possible use range (C).
NOTE:
• Check the drive belt auto-tensioner indication when the engine is cold.
• When new drive belt is installed, the indicator should be within the range (B) in the figure.
• Visually check entire drive belt for wear, damage or cracks.
• If the indicator is out of the possible use range or belt is damaged, replace drive belt.
DRIVE BELT : Tension Adjustment
INFOID:0000000005516142
MA-39, "DRIVE BELT : Drive Belt"
.
ENGINE COOLANT
ENGINE COOLANT : Inspection
INFOID:0000000005516143
LEVEL
JPBIA1625ZZ
1.
Idler pulley
2.
Drive belt
3.
Power steering oil pump
4.
Drive belt auto-tensioner
5.
Crankshaft pulley
6.
Idler pulley
7.
A/C compressor
8.
Alternator
A.
Indicator
B.
Range when new drive belt is installed
C.
Possible use range
D.
View D
: Engine front
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст